ARHM-13橡胶沥青混合料配合比设计性能及施工技术研究  

Study on the Mix Design Performance and Construction Technology of ARHM-13 Rubber Asphalt Mixture

作　　者：杨满红 YANG Manhong(Gansu Zhongjiao Huaqiang Engineering Construction Co.,Ltd.)

机构地区：[1]甘肃中交华强工程建设有限公司

出　　处：《广东建材》2024年第3期114-117,共4页Guangdong Building Materials

摘　　要：本文以某高速公路扩建工程通过ARHM-13沥青混凝土面层试验段施工为依据,验证按沥青混凝土下层生产配比的混合料是否能达到设计指标和验收规范的要求,同时也检验所采用的沥青混合料及设备的上料速度、拌和数量、拌和时间、拌和温度等指标,铺装设备铺装速度,温度,自动找平;本工程段试验施工通过对试验段施工的总结,为今后指导大面积ARHM-13沥青混凝土下层施工提供重要的依据,并经工程试验段施工结果评价取得了较为理想的施工效果。Based on the construction of the ARHM-13 asphalt concrete surface test section,this paper verifies whether the mixture produced to the lower layer of asphalt concrete can meet the requirements of design index and acceptance specifications,At the same time,it also check the asphalt mixture and equipment used in the speed of loading,mixing quantity,mixing time,mixing temperature and other indicators,speed of paving equipment,temperature,and automatic leveling.Through the summary of the construction of the test section,the construction of engineering section test provide an important basis for guiding the construction of ARHM-13 asphalt concrete in the future,and the evaluation of construction results of engineering section test has achieved a relatively ideal construction effect.

关 键 词：高速公路 沥青路面 试验段施工 

分 类 号：U414[交通运输工程—道路与铁道工程]