基于Moldflow软件对薄壁件某塑料喷嘴的注塑方案优化研究  

Optimization of Injection Molding Scheme for a Thin-walled Plastic Nozzle Based on Moldflow Software

作　　者：袁志华[1] 符烜赫 袁博 YUAN Zhihua;FU Xuanhe;YUAN Bo(School of Equipment Engineering,Shenyang Ligong University,Shenyang 110159,China;Shenyang City University,Shenyang 110112,China)

机构地区：[1]沈阳理工大学装备工程学院,沈阳110159 [2]沈阳城市学院,沈阳110112

出　　处：《机械工程师》2024年第3期14-17,共4页Mechanical Engineer

基　　金：辽宁省“兴辽英才计划”项目(XLYC1820104)。

摘　　要：喷嘴注塑产品的质量和性能很大程度上由注塑方案和工艺参数所决定,不当的注塑方案和工艺参数会导致充填不足、熔接线过多、翘曲变形量大等问题。为了可以减少生产周期,节约生产成本,利用三维软件UG对喷嘴进行建模,基于模流分析软件Moldflow软件对喷嘴注塑产品进行分析和优化,通过比较点浇口和侧浇口两种方案的分析结果,最终确定该产品点浇口的方案更好。并通过设计正交实验,得到优化后的工艺参数。The quality and performance of nozzle injection molding products are largely determined by the injection molding scheme and process parameters,improper injection molding scheme and process parameters will lead to underfilling,excessive fusion line,warpage and deformation.In order to reduce the production cycle and save the production cost,this paper uses three-dimensional software UG to model the nozzle,and analyzes and optimizes the nozzle injection molding products based on the mold flow analysis software Moldflow.By comparing the analysis results of the two schemes of point gate and side gate,it is finally determined that the point gate scheme of this product is better.The optimized process parameters are obtained by designing orthogonal experiments.

关 键 词：喷嘴 MOLDFLOW 模流分析 浇口位置 正交优化 

分 类 号：TQ320.52[化学工程—合成树脂塑料工业] TP391.7[自动化与计算机技术—计算机应用技术]