检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郑永峰 丁鑫[1,2] 崔冠科 解鸣 Zheng Yong-feng;Ding Xin;Cui Guan-ke;Xie Ming(Key Laboratory of the Ministry of Education for Structural Strengthening and Retrofitting of Buildings and Underground Space Engineering,Shandong Jianzhu University,Jinan 250101,China;School of Civil Engineering,Shandong Jianzhu University,Jinan 250101,China;Engineering Research Institute of Appraisal and Strengthening of Shandong Jianzhu University Co.Ltd,Jinan 250013,China;Shandong Jianzhu University Design Group Co.Ltd,Jinan 250013,China)
机构地区:[1]山东建筑大学建筑结构加固改造与地下空间工程教育部重点实验室,山东济南250101 [2]山东建筑大学土木工程学院,山东济南250101 [3]山东建筑大学工程鉴定加固研究院有限公司,山东济南250013 [4]山东建筑大学设计集团有限公司,山东济南250013
出 处:《工程抗震与加固改造》2024年第1期169-176,共8页Earthquake Resistant Engineering and Retrofitting
基 金:山东省自然科学基金面上项目(ZR2022ME018);山东省重点研发计划(重大科技创新工程)项目(2021CXGC011204);国家自然科学基金面上项目(52278507);山东省住房城乡建设科技规划项目(2019-K9-7)。
摘 要:某地下车库在降水作业时,将勘探孔改为降水井,引发突涌现象,导致基础底部脱空,筏板产生不均匀沉降,上部结构开裂严重。通过ABAQUS建立地下车库的实体模型,模拟承重结构的变形和损伤,探明地基不均匀沉降对承重结构的影响。结合现场实测结果、数值模拟结果及《混凝土结构设计规范》(GB 50010-2010)推荐公式,获取承重构件受力钢筋的实际应力状态,为结构加固设计提供依据。最后,采取加大截面、粘贴碳纤维布等方法对该车库承重构件进行了加固处理,加固方法可为类似工程提供借鉴。The confined water inrushing was triggered by the conversion of an exploration hole into a precipitation well during a precipitation operation,which leads to cavity beneath the foundation slab and causes the uneven settlement of the raft board.Consequently,the superstructure of the underground garage seriously cracked.A solid model of the garage was established by ABAQUS to simulate the deformation and damage of the structural member and to investigate the effect of uneven settlement of the foundation on the bearing structure.Combined with the field measurement results,numerical simulation results and formulas recommended in code for design of concrete structures(GB 50010-2010),the actual stress state of reinforcing bars in structural elements was obtained,so as to provide a basis for the strengthening design of the garage.Finally,the methods of enlarging the section and sticking carbon fiber cloth were adopted to strengthen the structural members of the garage,and can provide a reference for similar projects.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.147.86.123