检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘博星 卢金玲[1] 冯建军[2] 王维 朱国俊[1] 戈振国 杨沁源 LIU Boxing;LU Jinling;FENG Jianjun;WANG Wei;ZHU Guojun;GE Zhenguo;YANG Qinyuan(Institute of Water Resources and Hydro-electric Engineering,Xi’an University of Technology,Xi’an 710048,China;State Key Laboratory of Eco-hydraulics in Northwest Arid Region,Xi’an University of Technology,Xi’an 710048,China;Shaanxi Weihe Ecological Zone Protection Center,Xi’an 710004,China)
机构地区:[1]西安理工大学水利水电学院,西安710048 [2]西安理工大学西北旱区生态水利国家重点实验室,西安710048 [3]陕西省渭河生态区保护中心,西安710004
出 处:《农业工程学报》2024年第2期217-227,共11页Transactions of the Chinese Society of Agricultural Engineering
基 金:国家自然科学基金项目(52206054,52079108);陕西省自然科学基金项目(2021JM-328);博士创新基金。
摘 要:离心泵进水管路通常布置阀门供检修时切断水流,这会导致离心泵入流畸变。该研究旨在分析泵前检修阀所诱发的非定常尾迹特征及其对大流量工况离心泵运行特性的影响机理。试验对比了均匀来流和畸变来流条件下离心泵的外特性,数值模拟研究了阀板尾迹涡的流动特征及其对离心泵非稳态内流场的影响,分析了阀板尾迹涡诱发的叶轮径向力。结果表明:两种来流条件下数值模拟与试验得到的离心泵外特性误差在5%以内;对离心泵性能产生主要影响的尾迹涡主要来自阀门阀板一侧的边界层分离与卷吸,入流畸变导致大流量工况下离心泵效率相较于均匀入流下降9.15%,扬程降低1.2 m;阀板尾迹在离心泵入口产生1.9倍转频的脉动频率;尾迹涡的周期性入流导致两个叶片前缘的最大相对液流角由30°分别增大至43°和39°,这两个叶片的压力面脱流加剧,产生逐渐向下游耗散的失速团,叶片承受2倍转频的非稳态激振力;尾迹涡的周期性吸入导致叶轮上的时均径向力增大至均匀入流的4.5倍左右,最大径向力达到均匀入流的7倍左右,径向力矢量发生偏移,离心泵断轴风险加剧。研究结果可为工业现场中离心泵运行稳定性的改善提供理论依据。Centrifugal pumps are widely used in industrial fields due to their simple structure and reliable operation.In industrial sites,valves are usually arranged in the inlet pipe of centrifugal pumps to cut off water flow during maintenance.However,the valve wake causes inflow distortion of the centrifugal pump,and the wake vortex also has a strong unsteady effect.These characteristics contradict the assumed stable and uniform inflow conditions during the design stage of the centrifugal pump,resulting in a deviation between the actual performance of the centrifugal pump and its design performance and reducing its stability.Therefore,conducting research on the impact of valve for maintenance on the performance of centrifugal pumps is of great significance for optimizing the design of inflow pipelines and improving the operational stability of centrifugal pumps.The research object of this article is a Tri-eccentric butterfly valve and a semi-open centrifugal pump,aiming to study the unsteady wake characteristics induced by the valve and its impact mechanism on the operating characteristics of centrifugal pumps under high flow conditions.The Tri-eccentric maintenance valve is placed at the position of one pipe diameter before the inlet of the centrifugal pump as the inflow distortion condition,and the situation without the valve is used as the uniform inflow condition.The external characteristics of the centrifugal pumps under uniform and distorted inflow conditions are compared through experiments.Numerical simulation is used to study the flow characteristics of valve plate wake vortices and their impact on the unsteady internal flow field of the centrifugal pump.The radial force of the impeller induced by valve plate wake vortices is analyzed.The results show that under the two conditions of uniform inflow and distorted inflow,the numerical simulation and experimental results of the external characteristics are in good agreement,with errors within 5%,and the accuracy of the numerical simulation used to reflect the flow
分 类 号:TH311[机械工程—机械制造及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200