检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:韦芳芳[1] 包淑珉 邵盛 王永泉 孔纲强[1] WEI Fangfang;BAO Shumin;SHAO Sheng;WANG Yongquan;KONG Gangqiang(College of Civil and Transportation Engineering,Hohai University,Nanjing 210098,China;Zhejiang Province Institute of Architectural Design and Research,Hangzhou 310030,China;School of Architecture Engineering,Nanjing Institute of Technology,Nanjing 211167,China)
机构地区:[1]河海大学土木与交通学院,江苏南京210098 [2]浙江省建筑设计研究院,浙江杭州310030 [3]南京工程学院建筑工程学院,江苏南京211167
出 处:《河海大学学报(自然科学版)》2024年第2期77-83,共7页Journal of Hohai University(Natural Sciences)
基 金:国家自然科学基金项目(51608168);中央高校基本科研业务费专项资金资助项目(B200202091)。
摘 要:为研究斜拉荷载倾斜角度和叶片埋深对螺旋桩极限承载力的影响,基于ABAQUS软件构建了砂土中螺旋桩的有限元模型,通过螺旋桩水平承载机理砂箱试验与竖向拉拔试验数据,对模型的准确性和可行性进行验证。设置4组不同叶片埋深的螺旋桩模型,分别施加不同角度的斜拉荷载,探讨了砂土地基中螺旋桩的承载性能与斜拉角度、叶片埋深的相关性。结果表明:砂土中螺旋桩的极限承载力随着斜拉角度的增大不断减小;当斜拉角度小于30°时,螺旋桩极限承载力与斜拉角度的关系曲线近似呈线性;螺旋桩极限承载力存在一个临界埋深比,当埋深比大于等于4时,承载力不随埋深比的增大而变化。推导了深埋状态下螺旋桩受斜拉荷载作用的极限承载力公式,经验证该公式能较好反映螺旋桩极限承载力随斜拉角度增大而逐渐下降的规律。In order to study the correlation between bearing capacity of helical piles in sand foundation and oblique tensile angle and burial depth,the finite element model of helical piles in sand is established by ABAQUS.The numerical simulation results and test results of helical piles under vertical and horizontal pull-out are compared to verify the accuracy and feasibility of the numerical model.Considering the influence of oblique tensile angle and burial depth on the ultimate bearing capacity of helical piles,four groups of helical pile models with different burial depths,are set up and different oblique tensile angles are applied respectively.The results suggest that the ultimate bearing capacity of helical piles in sand decreases when the oblique tensile angle increases.When the oblique tensile angle is less than 30°,the relationship curve between the ultimate bearing capacity and the oblique tensile angle is approximately linear.There is a critical burial depth ratio for the ultimate bearing capacity of helical piles.When the burial depth ratio is not less than 4,it does not change with the increase of burial depth ratio.Meanwhile,the ultimate bearing capacity formula of deeply buried helical piles under oblique tensile load is derived.Through verification,the formula can better reflect the rule that the ultimate bearing capacity of helical piles decreases gradually with the increase of oblique tensile angle.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.145