注浆成形制备金尾矿基轻质瓷浆料性能的研究  

Study on the Preformance of Gold Tailings Base Lightweight Porcelain Paste Prepared by Grouting Molding

作　　者：刘华臣[1] 袁秋文 邓腾飞[2] Liu Huachen;Yuan Qiuwen;Deng Tengfei(Technology Center of China Tobacco Hubei Industrial Co.Ltd,Wuhan,430014,China;State Key Laboratory of Silicate Materials for Architectures,Wuhan University of Technology,Wuhan,430070,China)

机构地区：[1]湖北中烟工业有限责任公司,武汉430040 [2]武汉理工大学硅酸盐建筑材料国家重点实验室,武汉430070

出　　处：《陶瓷》2024年第3期9-12,22,共5页Ceramics

摘　　要：本研究采用了注浆成形工艺制备金尾矿基轻质瓷制品,研究了其浆料性能。通过引入通过温轮胶、魔芋胶和羟丙基甲基纤维素等悬浮稳定剂来改善陶瓷浆料稳定性和流动性,使浆料达到注浆成形的要求。同时,还阐明了悬浮稳定剂对陶瓷浆料稳定性和流变特性的影响。This study utilized the injection molding process to prepare lightweight ceramic products based on gold tailings.The stability and flowability of the ceramic slurry were improved by introducing suspension stabilizers such as carboxymethyl cellulose,konjac gum,and hydroxypropyl methylcellulose,enabling the slurry to meet the requirements for injection molding.Additionally,this study elucidated the influence of suspension stabilizers on the stability and rheological properties of ceramic slurries.

关 键 词：金尾矿 轻质瓷 注浆成形 

分 类 号：TQ174.758.12[化学工程—陶瓷工业]