基于Matlab的固钉器传动结构软件设计及应用  

Development and Application of Parametric Design Software for Electro-Pneumatic Nailing Device on Matlab

作　　者：张利 文华斌 罗成兵 李俊 李鸿凯 何瑞德 赵康名 ZHANG Li;WEN Huabin;LUO Chengbin;LI Jun;LI Hongkai;HE Ruide;ZHAO Kangming(School of Mechanical Engineering,Sichuan University of Science&Engineering,Zigong 643000,China;Chengdu Cigarette Factory,China Tobacco Sichuan Industry Co.,Ltd.,Chengdu 610000,China;Dongfang Electric Company Limited by Shares,Chengdu 617000,China)

机构地区：[1]四川轻化工大学机械工程学院,四川自贡643000 [2]四川中烟工业有限责任公司成都卷烟厂,成都610000 [3]东方电气股份有限公司,成都617000

出　　处：《成都工业学院学报》2024年第2期10-16,共7页Journal of Chengdu Technological University

摘　　要：电气动固钉器设计参数多,且内在关系复杂,使得研发周期较长效率低。为提高某类型电动固钉器的设计效率,采用Matlab、Kiss soft与Excel联合编制的方法,开发了可视化的参数化设计软件。其中Matlab实现设计计算、程序编译及界面实现,Kiss soft实现齿轮结构设计功能,Excel作为数据库保存设计结果。该软件针对不同类型电动固钉器的需求,以电机参数、射钉威力、主缸直径等作为输入参数,给出传动系统方案,设计出三级行星减速器、一组锥齿轮和传动丝杠结构。根据各齿轮结构参数,自行计算其齿根安全系数和齿面安全系数值,对结构进行强度校核,通过Excel表格输出设计结果。结果表明,该软件所设计出的传动系统满足实际工作要求,可作为电动固钉器设计的有效辅助,快速完成不同款型产品的设计,缩短研发周期,提高研发效率。The design parameters of the electro-pneumatic nailing device are numerous and the internal relationships are complex,which makes the development cycle long and the efficiency low.In order to improve the design efficiency of a certain type of electric nailing device,a visual parametric design software was developed by using Matlab,Kiss soft and Excel.Design calculations,program compilation,and interface implementation were realized by Matlab,gear structure design function was realized by Kiss soft,and Excel serves as a database to store design results.This software was designed to meet the requirements of different types of electric nailing device,motor parameters,nail shooting power,master cylinder diameter were used as input parameters to design a transmission system scheme,and a three-stage planetary reducer,a set of bevel gears,and a transmission screw structure.Based on the structural parameters of each gear,the root safety factor and tooth surface safety factor values were calculated,strength verification of the structure was performed,and the design results through an Excel spreadsheet were output.The results show that the transmission system designed by the software meets practical work requirements and can serve as an effective auxiliary for the design of electric electric nailing device.This device can quickly complete the design of different types of products,shorten the research and development cycle,and improve research and development efficiency.

关 键 词：结构设计 固钉器 MATLAB 行星减速器 软件开发 Kiss soft 

分 类 号：TU318.1[建筑科学—结构工程]