小提花织物双织轴织造工艺的优化  

Weaving process optimization of small jacquard fabric with two-beam

作　　者：张鑫 方黎明 陈青华 罗坤 常嘉银 ZHANG Xin;FANG Liming;CHEN Qinghua;LUO Kun;CHANG Jiayin(Chongshang Shida(i Jiangsu)Texitile Co.,Ltd.,Suzhou,215228,China;Suzhou Zhenzhi Youpin Textile New Materials Co.,Ltd.,Suzhou,215228,China)

机构地区：[1]翀尚时代(江苏)纺织科技有限公司,江苏苏州215228 [2]苏州真质优品纺织新材料有限公司,江苏苏州215228

出　　处：《棉纺织技术》2024年第4期83-86,共4页Cotton Textile Technology

摘　　要：探讨在双织轴喷气织机上生产平纹小提花织物的技术措施。以一款细号高密平纹小提花织物生产为例,统计织造工序停台次数并进行原因分析。通过优化浆料配方,改进浆纱工艺,提高了经纱质量。在织造工序,重点优化了经位置线、开口时间、上机张力、织机速度等工艺参数,提高了织机效率。结果表明:工艺优化后,织机效率从69.8%提升到88.9%,百米布疵点评分从17分降低到14分。认为:优化后的工艺参数符合生产要求,并提高了双织轴喷气织机生产平纹小提花织物的织机效率。Technology measures for producing plain small jacquard fabric on air-jet loom with two-beam were discussed.A fine and high density plain small jacquard fabric was taken as an example,the stopping times of weaving process were counted and the reasons were analyzed.The quality of warp was improved by optimizing sizing instruction and improving the sizing process.In the weaving process,the process parameters such as warp shed,shed timing,loom tension and loom speed were optimized to improve loom efficiency.The results showed that the loom efficiency was increased from 69.8%to 88.9%,and the defects score was decreased from 17 points to 14 points.It is considered that the optimized process parameters meet the production requirements and the loom efficiency of producing small jacquard plain fabric is improved.

关 键 词：喷气织机 双织轴 小提花 浆料配方 开口时间 织机效率 

分 类 号：TS105.4[轻工技术与工程—纺织工程]