检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:冯蠡 兰长林[1] 宋朝晖 孙薇 姜功 胡启航 王家豪 葛裕杰 FENG Li;LAN Changlin;SONG Zhaohui;SUN Wei;JIANG Gong;HU Qihang;WANG Jiahao;GE Yujie(School of Nuclear Science and Technology,Lanzhou University,Lanzhou 730000,China;Northwest Institute of Nuclear Technology,Xi'an 710024,China;Research Institute of Physics and Chemical Engineering of Naclear Industry,Tianjin 300180,China)
机构地区:[1]兰州大学核科学与技术学院,兰州730000 [2]西北核技术研究院,西安710024 [3]核工业理化工程研究院,天津300180
出 处:《核电子学与探测技术》2024年第1期86-93,共8页Nuclear Electronics & Detection Technology
基 金:国家磁约束聚变能发展研究专项(批准号2019YFE03040003)。
摘 要:溴化镧(LaBr_(3):Ce)探测器是一种性能优良的无机闪烁体探测器,准确的LaBr_(3):Ce探测器γ响应参数以及响应能谱是开展应用工作的基础。通过对实验中实测γ能谱的分析,可以得到溴化镧谱仪的半高宽-能量关系,在尝试使用MCNP中GEB卡还原此关系时,发现可将程序中自带的半高宽-能量函数简化,简化后的函数关系仍能较好地反映实验测量信息。在此基础上,采用MCNP程序模拟了0.1~5 MeV的单能γ射线在Φ50 mm×10 mm溴化镧探测器中的响应输出,构建了其γ响应函数矩阵。通过能谱计算得到展宽系数后,编写MATLAB计算程序对构建的响应矩阵进行高斯展宽。利用展宽后的矩阵通过加权最小二乘法对实验测得的复杂能谱进行解谱,并将解谱结果与实验测量数据进行比较验证。结果表明:展宽后的响应函数与实验得到的响应函数符合一致,通过数值解谱可以很好地给出实验测量中不同γ源的能量以及相对产额等信息。Lanthanum bromide(LaBr_(3):Ce)detector is a kind of newly developing inorganic scintillator detector,which has high resolution and can be made into larg size.The LaBr_(3)scintillator detector used in this experiment is provided by Northwest Nuclear Technology Research Institute.The detector is composed of cylindrical LaBr_(3):Ce crystal(50 mm in diameter and 10 mm in thickness)and 9815B photomultiplier tube produced by ET Company.It was calibrated with standard Co,Cs,Eu source to verify its energy linearity.The lanthanum bromide detector used in the experiment was simulated by MCNP software package.The GEB card in MCNP can broaden simulated energy spectrum with its own FWHM-energy function.When using the GEB card to reproduce experiment spectrum,it's found that the function GEB card carries can be simplified.It can be converted from a three parameter function to a two parameter function.Using the new function to simulate spectrum,it can be seen that the simulated energy spectrum can reproduce the experimental energy spectrum well.Attempt of using this function to try to unfold the spectrum for verifying the correctness and practicability of this function was also made.Taking 0.1 MeV as the starting point,0.05 MeV as the step,5 MeV as the energy end point,99 single energy-ray response are simulated using MCNP.The MATLAB calculation program is compiled using the simplified function to expand the response matrix to Gaussian.The broadened matrix is used to unfold the spectrum through the weighted least square method.By weighting the energy channels with different counts,the contribution of important signals with more counts(such as full energy peak)to spectrum unfolding can be improved,which can effectively improve the accuracy of spectrum solution and ensure the correctness of spectrum unfolding.The background spectrum and coCo spectrum are unfolded.The background of the detector mainly comes from two kinds of rays.There are two kinds of gamma rays emited from the decay of 138 La.For one,13 La is converted from elec
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.80