检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:董文学 DONG Wenxue(Harbin Dong'an Engine(Group)Corporation Ltd.,Harbin 150006,China)
机构地区:[1]中国航发哈尔滨东安发动机有限公司,黑龙江哈尔滨150006
出 处:《轻合金加工技术》2024年第1期58-63,共6页Light Alloy Fabrication Technology
摘 要:探讨了固溶温度和固溶时间对EV31A镁合金力学性能、显微组织、断口形貌的影响。结果表明:当固溶温度520℃时,EV31A镁合金综合力学性能最优。固溶时间大于6h后,固溶时间对其抗拉强度、伸长率的影响不大,固溶时间取6~10h为宜。The experiment studied the effect of solution temperature and solution time on the mechanical properties,microstrusture and fracture morphology of the EV31A magnesium alloy.The results show that when solution temperature is 520℃C,mechanical properties of EV31A magnesium alloy are the best.When solution time is longer than 6 h,it has little effect on tensile strength and elongation of EV31A magnesium alloy.The appropriate solution time should be 6-10 hours.
关 键 词:铸造镁合金 固溶处理 力学性能 显微组织 强化机理
分 类 号:TG316.2[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200