检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:慎月强 商志军 李志明 夏誉 SHEN Yueqiang;SHANG Zhijun;LI Zhiming;XIA Yu(Hangzhou Institute of Quality and Technical Supervision and Inspection,Hangzhou 310019,China;National Lighting Test Center(Beijing),Beijing 100022,China;Hangzhou Hpwinner Opto Corporation,Hangzhou 310015,China)
机构地区:[1]杭州市质量技术监督检测院,浙江杭州310019 [2]国家电光源质量监督检验中心(北京),北京100022 [3]杭州华普永明光电股份有限公司,浙江杭州310015
出 处:《中国照明电器》2024年第3期56-61,共6页China Light & Lighting
摘 要:外壳防护等级是衡量照明产品质量的一项重要指标,本文在整理照明产品国内外外壳防护标准的基础上,对不同标准中关于外壳防护等级要求的差异进行了对比,对我国照明产品外壳防护等级的常见问题做了分析,提出了在外壳防护等级标准体系中增加气密性测试的建议,以推动照明产品在外壳防护上的研发、制造和检测环节的质量提升。The degrees of protection provided by enclosures is an important indicator to measure the quality of lighting product.Based on the sorting out of domestic and foreign enclosures protection standards of lighting products,this paper compares the differences in the requirements of enclosures protection capabilities in different standards,analyzes the common problems of IP ratings of lighting products in China,and puts forward some suggestions on adding air tightness test to the enclosure protection standard system,so as to promote the quality improvement of lighting products in the research and development,manufacture and inspection of enclosure protection.
关 键 词:照明产品 外壳防护等级 IP等级 标准体系 国内外对比研究
分 类 号:TM923.0[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249