电火花直读光谱法测定合金钢中碳含量不确定度评定  

Evaluation of Uncertainty in the Determination of Carbon Content in Alloy Steel by Direct Reading Electrospark Spectroscopy

作　　者：郭文霞 Guo Wenxia(Taiyuan Boiler Group Co.,Ltd.,Taiyuan Shanxi 030008,China)

机构地区：[1]太原锅炉集团有限公司,山西太原030008

出　　处：《山西冶金》2024年第2期56-57,62,共3页Shanxi Metallurgy

摘　　要：基于标准JJF 1059.1—2012《测量不确定度评定与表示》与GB/T 4336—2016《碳素钢和中低合金钢多元素含量的测定火花放电原子发射光谱法(常规法)》,分析直读光谱仪测量合金钢中碳的不确定度的来源,然后建立数学模型,计算得出检测结果中碳含量的不确定度,并且针对两个影响显著的因素提出了改进意见。Based on the standard JJF 1059.1-2012 Evaluation and Representation of Measurement Uncertainty and GB/T 4336-2016 Determination of Multielement Content in Carbon Steel and Medium and Low Alloy Steel-Spark Discharge Atomic Emission Spectroscopy(Conventional Method),the sources of uncertainty in measuring carbon in alloy steel using a direct reading spectrometer are analyzed.Then,a mathematical model is established to calculate the uncertainty of carbon content in the detection results,and improvement suggestions were proposed for the two factors that have a significant impact on it.

关 键 词：直读光谱法 合金钢 碳含量 不确定度 

分 类 号：TG115[金属学及工艺—物理冶金]