增大钢包吹氩量对夹杂物去除的影响研究  

Research on the Effect of Increasing Argon Blowing in Ladle on Inclusion Removal

作　　者：杨帅 朱云杰 张志辉 周鹏明 Yang Shuai;Zhu Yunjie;Zhang Zhihui;Zhou Pengming(Steel Mill,Delong Steel Co.,Ltd.,Xingtai Hebei 054009,China;Hebei Hot Rolled Plate and Strip Technology Innovation Center,Xingtai Hebei 054009,China)

机构地区：[1]德龙钢铁有限公司炼钢厂,河北邢台054009 [2]河北省热轧板带钢技术创新中心,河北邢台054009

出　　处：《山西冶金》2024年第2期115-117,共3页Shanxi Metallurgy

摘　　要：在渣洗工艺中,夹杂物的碰撞长大和吹氩促进上浮尤为重要。在其他条件不变的前提下,通过延长转炉炉后吹氩时间来增大吹氩量,重点分析不同吹氩量对渣样成分、钢中夹杂物成分、尺寸及平均密度的影响,从而确定最适合目前生产的最佳吹氩量。In the slag washing process,the collision growth of inclusions and the promotion of upward floating by argon blowing are particularly important.Under the premise that other conditions remain unchanged,the argon lowing time after converter is extended to increase the amount of argon blowing,and the influence of different amounts of argon blowing on the composition of slag sample,the composition of inclusions in steel,the size and the average density is analyzed,so as to determine the best amount of argon blowing suitable for current production.

关 键 词：吹氩量 夹杂物 渣洗工艺 

分 类 号：TF769[冶金工程—钢铁冶金]