检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:孙斌 王友仁[1] 高佳豪 SUN Bin;WANG Youren;GAO Jiahao(College of Automation Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 211106,China)
机构地区:[1]南京航空航天大学自动化学院,江苏南京211106
出 处:《机械制造与自动化》2024年第2期15-19,共5页Machine Building & Automation
基 金:航空发动机及燃气轮机重大专项基础研究项目(J2019-1V-0018-0086)。
摘 要:以重合度为1~2之间的定轴渐开线直齿轮为研究对象,基于Archard磨损模型数值仿真齿面磨损的分布规律,研究齿轮中心距安装误差对齿轮啮合过程的影响,揭示中心距安装误差对齿面磨损的影响机理。结果表明:在0.1%的中心距误差下,中心距的增大会使齿轮的重合度下降,啮合区域变小,啮入点的位置远离齿根,从而减小齿面磨损。Taking fixed-axle involute spur gears with coincidence degree between 1~2 as the research objects,the distribution law of tooth surface wear was simulated numerically based on Archard wear model,the influence of gear center distance on gear meshing process was studied,and the influence mechanism of center distance on tooth surface wear was revealed.The results show that with 0.1% of the center distance error,the increase of the center distance will reduce the gear overlap,make the meshing area smaller and keep the rod position far away from the root,thus reducing the wear on the tooth surface.
关 键 词:齿面磨损 特性分析 Archard磨损模型 中心距 安装误差
分 类 号:TH117.1[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.13