基于单片机的电容测量电路设计仿真及实现  

Simulation and Implementation of Capacitance Measurement Circuit Design Based on Microcontroller

作　　者：吴燕婷 李自成[1] 何超 邓成浩 刘其东 文嘉骏 甘烙 王毅鸿 Wu Yanting;Li Zicheng;He Chao;Deng Chenghao;Liu Qidong;Wen Jiajun;Gan Lao;Wang Yihong(School of Engineering and Technology,Chengdu University of Technology,Chengdu Sichuan 610059,China)

机构地区：[1]成都理工大学工程技术学院,四川成都610059

出　　处：《现代工业经济和信息化》2024年第2期85-88,共4页Modern Industrial Economy and Informationization

摘　　要：为研究更优质的电容设计方法,采用了Proteus、STC89C51RD+、NE555时基芯片对电容的设计进行试验和仿真,并将数值计算和试验仿真结果作对比。研究结果表明:使用STC89C516RD+处理器作为主芯片的效果最好,因此在研究电容设计问题时可以优先考虑使用STC89C516RD+处理器,但需注意串并联后电流以及耐压值的大小。In order to study a better capacitor design method,Proteus,STC89C51RD+,NE555 time base chip were used to test and simulate the design of capacitors,and numerical calculations and test simulation results were compared.The results of the study show that the use of STC89C516RD+processor as the main chip has the best effect,so you can give priority to the use of STC89C516RD+processor in the study of the capacitor design problem,but you need to pay attention to the size of the current as well as the withstand voltage value after the series-parallel connection.

关 键 词：单片机 电容 NE555 PROTEUS 

分 类 号：TP216[自动化与计算机技术—检测技术与自动化装置]