某枪械的连发改进仿真  

Improved Simulation of Certain Gun’s Repeating Firing

作　　者：贺大为 籍飞超 郭丽君 He Dawei;Ji Feichao;Guo Lijun(Hu’nan Institute Co.,Ltd.of Weapons and Light Weapons,Yiyang 413000,China)

机构地区：[1]湖南兵器轻武器研究所有限责任公司,湖南益阳413000

出　　处：《兵工自动化》2024年第3期92-96,共5页Ordnance Industry Automation

摘　　要：为研究在某型18.4 mm功能多防暴枪结构的基础上将半自动发射方式改为全自动发射的可行性,结合3维作图软件和仿真软件建立其动力学仿真模型。通过单发射击仿真结果和试验结果对比验证模型的有效性,并在此基础上进行连发射击仿真,对该型半自动防暴枪连发功能改进后的自动循环、抛壳、供弹等工况进行仿真分析。结果表明:防暴枪现有自动循环、供弹、抛壳等结构满足连发射击的要求,仅需对其发射机部分进行细微改动即可实现全自动射击。In order to study the feasibility of changing the semi-automatic firing mode into full-automatic firing mode on the basis of the structure of certain type of 18.4 multi-function riot gun,a dynamic simulation model was established by using three-dimensional mapping software and simulation software.The validity of the model was verified by comparing the simulation results of single shot with the experimental results,and on this basis,the simulation of continuous firing was carried out,and the simulation analysis of automatic cycle,ejection,ammunition feeding and other working conditions of the semi-automatic riot gun after the improvement of continuous firing function was carried out.The results show that the existing automatic circulation,ammunition feeding,ejection and other structures of the riot gun meet the requirements of continuous firing,and only the transmitter part of the riot gun needs to be slightly modified to achieve fully automatic firing.

关 键 词：防暴枪 动力学仿真 全自动射击 供弹 抛壳 

分 类 号：TJ279[兵器科学与技术—武器系统与运用工程]