一种高温高压井用小直径切割器设计及性能研究  

Design and Performance Study of A Small Diameter Cutter for High-Temperature and High-pressure Wells

作　　者：郭同政 李凯 高强 朱建新 舒通胜 汪长栓 GUO Tong-zheng;LI Kai;GAO Qiang;ZHU Jian-xin;SHU Tong-sheng;WANG Chang-shuan(Shengli Logging Company,Sinopec Matrix Corporation,Dongying,257096;North Schlumberger Oilfield Technologies(Xi’an)Co.Ltd.,Xi’an,710065)

机构地区：[1]中石化经纬有限公司胜利测井公司,山东东营257096 [2]北方斯伦贝谢油田技术(西安)有限公司,陕西西安710065

出　　处：《火工品》2024年第2期93-96,共4页Initiators & Pyrotechnics

摘　　要：针对高温高压小水眼油气井下管柱切割问题,设计了一种外径为Φ36 mm的小直径切割器,首次采用切割器两端同时起爆方式对钻杆进行切割,对其作用过程进行了仿真,并通过地面试验和井下试验对切割器的切割效果进行了验证。结果表明:该切割器能够在压力为95 MPa、温度为160℃的井下进行切割作业,实现对水眼大于等于Φ41 mm的多种规格钻杆的切割,且一次性切断钻杆,切割后切割装置接头无粘连、翻边小。本研究可为工程测井和油气资源的深层勘探开发提供技术支持。In response to the problem of cutting down the pipe strings in high-temperature and high-pressure small water hole oil and gas wells,a small diameter cutter with an outer diameter ofΦ36 mm was designed.For the first time,the drill pipe was cut by simultaneously detonating at both ends of the cutter,and its working process was simulated.The cutting effect of the cutter was verified through ground and underground tests.The results show that the cutter can perform cutting operations underground at a pressure of 95 MPa and a temperature of 160℃,achieving the cutting of various specifications of drill pipes with water holes greater than or equal toΦ41 mm,and cutting the drill pipes in one go.After cutting,the cutting device joint has no adhesion and small flipping.This study can provide technical support for the engineering logging and development of deep exploration of oil and gas resources.

关 键 词：小直径切割器 高温高压 小水眼油气井 钻杆切割 井下试验 

分 类 号：TJ459[兵器科学与技术—火炮、自动武器与弹药工程]