检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李瑞山[1] 吴进辉 陈龙伟[1] 袁晓铭[1] 李明睿 LI Ruishan;WU Jinhui;CHEN Longwei;YUAN Xiaoming;LI Mingrui(Key Laboratory of Earthquake Engineering and Engineering Vibration,Institute of Engineering Mechanics,China Earthquake Administration,Harbin 150080,China;Tongling University,Tongling 244000,China)
机构地区:[1]中国地震局工程力学研究所地震工程与工程振动重点实验室,黑龙江哈尔滨150080 [2]铜陵学院,安徽铜陵244000
出 处:《岩土工程学报》2023年第S02期189-194,共6页Chinese Journal of Geotechnical Engineering
基 金:中国地震局工程力学研究所基本科研业务费专项(2019C04);国家自然科学基金项目(51908520)。
摘 要:软土场地对地震动响应有强烈的非线性放大作用,不同国家和地区抗震设计规范普遍的做法是给出一套与各自场地分类标准相一致的调整系数来考虑地震动的场地效应。基岩输入地震动具有显著的不确定性,给出具有不同超越概率水平的场地调整系数能更好地符合基于性态的抗震设计要求。以50个覆盖土层厚度在50~150 m的Ⅲ,Ⅳ类软土场地为研究对象,从ESM数据库中筛选了43个参考场地在73次地震事件中记录到的100条强震记录并分别调幅至25,50,100,150 gal作为输入,采用一维等效线性化程序SHAKE2000开展了共20000种组合的土层地震响应计算。给出了不同强度地震动作用下峰值加速度、峰值速度和峰值位移的放大系数FPGA,FPGV和FPGD以及短周期(T=0.2 s)和中长周期(T=1 s)加速度反应谱放大系数F_(a)和F_(v)的分布形态及特征参数,并给出了超越概率为2%,16%和50%时不同放大系数的建议取值。The seismic response exhibits strong nonlinear amplification on soft soil sites.The common practice in different countries and regions for the seismic design codes is to provide a set of adjustment coefficients that are consistent with their respective site classification criteria to consider the local site effects.Given the significant uncertainties in bedrock input motions,putting forward the site adjustment factors with different levels of exceedance probabilities better meets the performance-based seismic design requirements.50 typeⅢandⅣsoft soil sites with covering soil layer thicknesses ranging from 50 to 150 m are collected as numerical models.100 strong seismic records are selected from 43 reference sites recorded during 73 earthquake events in the ESM database and their peaks are adjusted to 25,50,100 and 150 gal as inputs.Using the one-dimensional equivalent linear program SHAKE2000,a total number of 20000 site response calculations are carried out.The distribution features and characteristic parameters of the peak acceleration,peak velocity and peak displacement amplification coefficient,as well as the short-period(T=0.2 s)and medium-to-long period(T=1 s)acceleration response spectrum amplification coefficients,namely FPGA,FPGV,FPGD,F_(a) and F_(v),under different intensities of input motions are given.The recommended values for various amplification coefficients are also provided for the exceedance probabilities of 2%,16%and 50%.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.191.74.140