开放环境下钛合金激光熔覆的表面色差模型研究  

Surface Chromatic Aberration Model of Laser Cladding of Titanium Alloy in Open Environment

作　　者：朱清清 张津超 王恒[1] 曹宇鹏[1] 苏波泳 花国然[1] ZHU Qingqing;ZHANG Jinchao;WANG Heng;CAO Yupeng;SU Boyong;HUA Guoran(School of Mechanical Engineering,Nantong University,Jiangsu Nantong 226019,China)

机构地区：[1]南通大学机械工程学院,江苏南通226019

出　　处：《表面技术》2024年第7期156-163,199,共9页Surface Technology

基　　金：国家重点研发计划项目(2019YFB2005300);国家高技术船舶科研项目(MC-202031-Z07);江苏省博士后基金(2021k606c);江苏省高校自然科学研究项目-面上项目(20KJB460010);南通市基础科学研究项目(JC2021023)。

摘　　要：目的选择合适的工艺参数范围,在开放环境下获得性能良好的钛合金激光熔覆层。方法以氧含量衡量熔覆层的氧化程度,研究不同表面色差值下的氧含量的变化规律。以激光功率、扫描速度、送粉速率和气体流量为控制变量,利用分光测色仪检测熔覆层表面色差并以之来量化熔覆层表面颜色,以表面色差作为响应指标,基于响应面法建立熔覆层表面色差与熔覆工艺参数之间的数学模型。结果随着色差值的增加,熔覆层中的氧含量增加。激光功率对色差的影响要大于扫描速度,激光功率越大,色差值越大;低激光功率和高送粉速率可获得较小的色差值;扫描速度和送粉速率的交互作用对色差的影响较小;气体流量的变化对色差的影响较为显著,为了获得较小的色差,可增大气体流量。根据表面色差模型,当激光功率为950~1090W,扫描速度为5~7mm/s,送粉速率为1.15~1.65g/min,气体流量为24~32L/min进行工艺参数组合时,可获得满足熔覆条件的表面色差值。结论可用色差来表征熔覆层表面颜色,极限表面色差值为5.09,并得到了合适的激光熔覆工艺窗口。通过试验验证了模型所得预测值与实测值相吻合,证明了本文研究方法的有效性。Laser cladding has significant advantages for surface modification or surface repairing of materials.Due to the high specific strength,excellent corrosion resistance and good heat resistance,titanium alloys are regarded as a very good cladding material in surface treatment.However,they are extremely likely to be oxidized at high temperature,which results in metallurgical defects(oxide inclusions,cracks and pores)in the cladding layers,so a sealed chamber filling with inert gas is used.This brings big limitations when cladding the part with big size.Laser cladding of titanium alloys in an open environment is a good way to solve this problem.The current researches on oxidation focus on cladding in a sealed atmosphere chamber.However,the oxidation when cladding in an open environment is rarely studied.Oxidation is an inner performance,so it must be cut for evaluation,which also damages the cladding layer.It is also found that the cladding layers appear different surface colors when using different process parameter combinations.Colors can be represented by chromatic aberration.Therefore,the oxygen contents of the cladding layers formed in an open environment are investigated by different surface chromatic aberration values,and the model of surface chromatic aberration is established.TC4 was cladded on the substrate which was also TC4 in the open environment.Response surface methodology(RSM)was introduced to analyze the relationship between the surface chromatic aberration and the process parameters,such as laser power,scanning speed,powder feeding rate and gas flow rate.First,a newly developed coaxial double-layer shielding device was introduced to the cladding system in the open environment,so as to generate a local inert atmosphere around the molten pool.Second,a CCD matrix of 30 runs was designed using Design-Expert 8.0 software.The surface color of deposited samples was detected by HunterLab UltraScan PRO spectrophotometer.Finally,the oxidation degree of the cladding layer was evaluated by oxygen concentration.T

关 键 词：激光熔覆 钛合金 工艺参数 响应面法 表面色差 开放环境 

分 类 号：V261.8[航空宇航科学与技术—航空宇航制造工程]