基于网格梯度和形状因子的自由曲面透镜设计  

Freeform Lens Design Based on Gradient and Shape Factor of Grids

作　　者：陆建东 陈嘉文 刘锐 马佩服 李纲 Lu Jiandong;Chen Jiawen;Liu Rui;Ma Peifu;Li Gang(College of Science,Zhejiang University of Technology,Hangzhou 310023,Zhejiang,China;Hangzhou Xinhaiguanglian Technology Co.,Ltd.,Hangzhou 310005,Zhejiang,China)

机构地区：[1]浙江工业大学理学院,浙江杭州310023 [2]杭州心海光联科技有限公司,浙江杭州310005

出　　处：《光学学报》2024年第4期293-299,共7页Acta Optica Sinica

摘　　要：采用基于梯度和形状因子的网格优化方法适配能量分布并提升映射关系的可积性,在光源投影单位圆和目标面内分别进行等量初始四边形网格划分,使节点一一对应,并构建网格面积和映射关系可积性的权重评价函数。在保证所有节点位置拓扑关系不变的条件下,通过面积差场梯度和形状因子迭代调整网格分布,使映射关系满足能量分布要求同时优化可积性。基于网格优化的映射关系求解自由曲面并生成透镜,仿真所得非均匀光斑满足设计要求。该方法简化了平滑映射关系的求解过程,可以作为一种高效设计方法用于非均匀自由曲面透镜设计。Objective The optical design with arbitrary illuminance distribution is always a key concern of non-imaging optics due to its difficulty in solving the smooth mapping relationship.At present,the Monge-Ampère equation method,the supporting quadratic method(SQM),and the tailor method can solve this problem,but they all have drawbacks such as complex ideas and difficult manufacture.To seek a simple and efficient method,we start with mapping grids partitioning,and study the characteristic and optimization method of the integrability and energy matching of grids,providing references for the design of non-uniform freeform lenses.Methods The discussed mapping grid partitioning method is shown in Fig.1.Equal initial quadrilateral grids are performed within the unit circle of source projection and the rectangular target plane to make the grid nodes correspond one by one.According to the relationship in Fig.2,the energy is calculated by the grid area,and the area evaluation function is constructed based on the difference between the grid area and the ideal one.The integrability evaluation function is constructed based on the direction derivative residual of the nodes,and the weights are set according to the design.Under the guidance of the evaluation function,gradient operation is performed on the area difference to solve the area optimization vectors,and integrability optimization vectors are solved by the simplified node angle relationship in Fig.3 and are combined based on the weights.The nodes are moved according to the comprehensive vectors and subjected to boundary conditions and topological conservation relationships.New grids are generated and a new value of the evaluation function is calculated.When the value tends towards 0,the energy matching and integrability of the mapping are improved.Results and Discussions To verify the effectiveness of the method,we design a freeform lens that can display a nonuniform rectangular spot with the words"ZJUT"on the target.The effective angle of the source is set to 45°and in

关 键 词：光学设计 非成像光学 可积映射关系 拓扑守恒 等面保形 

分 类 号：O435[机械工程—光学工程]