电机刷架组件的电流线端接工艺改进  

Improvement of Current Line Terminating Technology of Brush Holder Assembly of Motor

作　　者：胡晓雯[1] 童杰[1] HU Xiaowen;TONG Jie(No.21 Research Institute of CETC,Shanghai 200233,China)

机构地区：[1]中国电子科技集团公司第二十一研究所,上海200233

出　　处：《微特电机》2024年第4期77-80,共4页Small & Special Electrical Machines

摘　　要：刷架组件电流线端采用焊接-压接工艺进行连接,受到原料及工艺参数的影响,合格率不稳定,且操作流程繁冗。采用模压式压接工艺,对工艺过程中的压接参数进行分析及改进,优化参数,有效缩短加工时间,提升压接后的产品质量及效率。The welding and crimping process is used to connect the current wire end of brush holder assembly,which is affected by raw materials and technological parameters,and the qualified rate is unstable and the operation process is complicated.The molding crimping process was used to analyze and improve the crimping parameters in the process,optimize the parameters,effectively shorten the processing time,improve the product quality after crimping.

关 键 词：刷架组件 电流线 压接 

分 类 号：TM305[电气工程—电机]