基于Moldflow的数码相机前盖塑料成型工艺研究  

Research on plastic forming process of digital camera front cover based on Moldflow

作　　者：刘成娟 Liu Chengjuan

机构地区：[1]福州职业技术学院,福建福州350108

出　　处：《木工机床》2024年第1期29-33,共5页Woodworking Machinery

基　　金：2021年福建省中青年教师教育科研项目(JAT210820)。

摘　　要：文章以某数码相机前盖塑件为研究对象,采用Moldflow和Pro/E软件进行塑料成型工艺研究。利用Moldflow软件完成相机前盖模流仿真,对填充时间和气穴分布、回路冷却介质温度和管壁温度、翘曲变形等参数进行分析,然后使用Pro/E软件进行模具结构设计。基于Moldflow的数码相机前盖塑料成型工艺研究为缩短塑件开发周期,提高制品质量,降低生产成本,增强企业竞争力提供参考。In this paper,the plastic molding process of the front cover of a digital camera is studied by using Moldflow and Pro/E.The mold flow simulation of the front cover of the camera was completed by using Moldflow.The filling time and cavitation distribu-tion,loop cooling medium temperature and tube wall temperature,warping deformation were analyzed.Then Pro/E was used to design the mold structure.The research on the plastic molding process of the front cover of digital camera based on Moldflow provides a refer-ence for shortening the development cycle of plastic parts,improving product quality,reducing production cost and enhancing the competitiveness of enterprises.

关 键 词：塑料成型工艺 模流分析 MOLDFLOW PRO/E 

分 类 号：TQ320.66[化学工程—合成树脂塑料工业]