熔模铸件尺寸控制的数字孪生建模关键技术与应用  

Key Technology and Application of Digital Twin Modeling for Deformation Control of Investment Casting

作　　者：官邦 汪东红 马洪波[3] 疏达[1,2] 丁正一 崔加裕[1] 孙宝德 GUAN Bang;WANG Donghong;MA Hongbo;SHU Da;DING Zhengyi;CUI Jiayu;SUN Baode(Shanghai Key Lab of Advanced High-Temperature Materials and Precision Forming,School of Materials Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,China;State Key Lab of Metal Matrix Composites,Shanghai Jiao Tong University,Shanghai 200240,China;School of Electro-Mechanical Engineering,Xidian University,Xi'an 710126,China)

机构地区：[1]上海交通大学材料科学与工程学院上海市先进高温材料及其精密成形重点实验室,上海200240 [2]上海交通大学金属基复合材料国家重点实验室,上海200240 [3]西安电子科技大学机电工程学院,西安710126

出　　处：《金属学报》2024年第4期548-558,共11页Acta Metallurgica Sinica

基　　金：国家重点研发计划项目Nos.2022YFB3706800和2020YFB1710100;国家科技重大专项项目Nos.2017-Ⅶ-0008-0102和J2019-Ⅵ-0004-0117;国家自然科学基金项目Nos.51821001和52090042;浙江省重点研发计划项目Nos.2020C01056、2021C01157和2022C01147。

摘　　要：熔模铸造工艺流程长、工序多,铸件成型过程孤岛控制,存在尺寸超差问题。本工作基于节点法向量和最近邻点,提出熔模铸造工艺全节点位移传递的计算方法,解决熔模铸件成型多流程的数据孤岛问题。研究蜡模注射成型和铸件凝固过程工艺参数-尺寸偏差的关系,为数字孪生建模提供数据模型。对环套环特征件建立铸件模具反变形设计和铸件多流程下工艺优化的数字孪生应用。该数字孪生模型应用于设计阶段,反变形设计出模具内腔的三维几何模型。模拟结果表明,铸件所有节点位移偏差在0.04 mm以下。应用于流程之间的工艺控制,根据前一工序下尺寸偏差,进行后续工艺优化调控。Investment casting processes are controlled separately for its complex casting system,resulting in the dimensional out of tolerance.A calculation method for node displacement transfer is proposed based on the node normal vector and the nearest neighbor points in investment casting;the relationship between injection parameters,dimensional deviation in injected wax pattern,and casting solidification is studied,which provides a data model for digital twin.The digital twin is applied to the antideformation design and process optimization under a multiprocess for ring-to-ring casting.In the design stage,the geometric model of the mold cavity is designed via reverse deformation,and the error between the simulation results of the casting after the antideformation design and the target geometric is<0.04 mm.In the casting,the optimal control of the subsequent process is performed according to the dimensional deviation of the previous process.

关 键 词：熔模铸造 尺寸传递 反变形设计 数字孪生 智能铸造 

分 类 号：TG146.3[一般工业技术—材料科学与工程]