检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王力[1,2] 潘启仁 周晓夫 杨喜娟 唐智勇 WANG Li;PAN Qiren;ZHOU Xiaofu;YANG Xijuan;TANG Zhiyong(School of Civil Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China;HATG Construction Group,Lanzhou 730099,China;Sichuan Communication Surveying&Design Institute CO.,LTD.,Chengdu,610017,China)
机构地区:[1]兰州交通大学土木工程学院,甘肃兰州730070 [2]甘肃公航旅建设集团有限公司,甘肃兰州730099 [3]四川省交通勘察设计研究院有限公司,四川成都610017
出 处:《防灾减灾工程学报》2024年第2期273-282,共10页Journal of Disaster Prevention and Mitigation Engineering
基 金:国家自然科学基金资助项目(52068045);甘肃省高等学校青年博士基金项目(2023QB-045);兰州交通大学甘肃省重点实验室开放课题(2022055)资助。
摘 要:目前铁路桥梁设计逐渐由容许应力法向极限状态法转变,而《铁路桥涵设计规范(极限状态法)》(Q/CR 9300—2018)并未提及地震作用与温度等可变作用的联合作用,给高寒高烈度区桥梁结构抗震设计带来了较大困难。为了推进桥梁以更经济的抗力方式抵御外荷载作用,通过目标可靠度指标确定其最优地震设计状况荷载组合分项系数,从而对现行桥梁设计规范抗震设计进行优化。建立了高寒地区某桥温度作用效应概率模型,使用Ferry Borges荷载组合理论探究地震和环境温度作用的效应分布特征,并基于JC法和多灾害荷载系数设计法(MH-LRFD)建立地震、温度作用荷载系数的表达式。依托某桥梁工程实例分别探究了地震、温度以及两者共同作用下的桥梁的失效概率。研究结果表明:环境温度引起的桥梁温度内力响应、主要构件材料特性变异均能显著影响桥梁的失效概率;对于高寒大温差地区,现行规范忽略环境温度效应将显著低估桥梁在地震作用下的失效概率。本文提出的F-J-M(Ferry Borges+JC+MH-LRFD)方法计算地震、温度作用组合系数,可为高寒地区桥梁抗震设计提供必要理论依据。Currently,the design of railway bridges is gradually transitioning from the allowable stress method to the limit state method.However,the Code for Design on Railway Bridge and Culvert(Limit State Method)(Q/CR 9300-2018)does not account for the combined effects of seismic actions and variable factors such as temperature,posing significant challenges for seismic design for bridges in areas of extreme cold and high seismic intensity.In order to promote bridge resistance to external loads in a more cost-effective way,the partial coefficient of the optimal seismic design condition load combination was determined by target reliability indices,thereby optimizing the seismic design stan-dards in current bridge design codes.A probability model for temperature effects on a bridge in cold re-gions was established.The distribution characteristics of the effects of earthquake and ambient temper-ature were explored using the Ferry Borges load combination theory.Expressions of the load factor of earthquake and temperature effects were established using JC method and multi-hazard load factor de-sign method(MH-LRFD).Taking a practical bridge engineering project as an example,the failure probabilities of a bridge under earthquake,temperature,and their combined actions were explored re-spectively.The results showed that both the temperature internal force response caused by ambient temperature and the variation in properties of the bridge′s main components significantly affected its failure probability.For extreme cold regions with significant temperature variations,ignoring ambient temperature in the current codes would significantly underestimate the failure probability under seismic actions.The proposed F-J-M(Ferry Borges-JC-MH-LRFD)method can be used to calculate the com-bined coefficients for earthquake and temperature actions,providing a necessary theoretical basis for the seismic design of bridges in extreme cold regions.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:52.14.145.78