面向盘类零件的加工仿真方法及工艺参数优化研究  

Study on Simulation Method and Processing Parameter Optimization in Machining of Disk Parts

作　　者：董立卓 李方春 吴宝海[1,2] 陈冰[1,2] DONG Lizhuo;LI Fangchun;WU Baohai;CHEN Bing(Key Laboratory of High Performance Manufacturing for Aero Engine,Ministry of Industry and Information Technology,Northwestern Polytechnical University,Xi'an 710072,China;Engineering Research Center of Advanced Manufacturing Technology for Aero Engine,Ministry of Education,Northwestern University,Xi'an 710072,China)

机构地区：[1]西北工业大学航空发动机高性能制造工信部重点实验室,西安710072 [2]西北工业大学航空发动机先进制造技术教育部工程研究中心,西安710072

出　　处：《机械科学与技术》2024年第4期611-618,共8页Mechanical Science and Technology for Aerospace Engineering

基　　金：国家重点研发计划项目(2020YFB1710400);民机专项(MJZ4-2N21)。

摘　　要：针对风扇盘材料的本构模型进行参数辨识,为使有限元模型的模型上有准确的加工应力场进行贴合,对TC11钛合金残余应力进行经验公式的建模,开展残余应力仿真方法研究。对风扇盘半精车小端进行仿真建模与验证。基于残余应力仿真结果进行工艺参数优化,通过实例加工验证了方法的有效性。The parameters of the constitutive model for fan disk material are identified.In order to fit the finite element model with accurate stress field in the machining,the empirical formula of residual stress of TC11 titanium alloy is modeled,and the simulation method of residual stress is studied.The simulation modeling and verification are carried out on the small end of the fan disk semi-finishing turning.The processing parameters are optimized based on the simulation results of residual stress,and the effectiveness of the method is verified by an example.

关 键 词：风扇盘 半精车加工 变形控制 工艺参数优化 

分 类 号：TG54[金属学及工艺—金属切削加工及机床]