不同热处理制度对Gr.38钛合金板材的组织性能的影响  

Influence of different heat treatment systems on microstructure and properties ofGr. 38 titanium alloy plate

作　　者：王幸运 杨铮 赵小龙 Wang Xingyun;Yang Zheng;Zhao Xiaolong(Xinjiang XRun New Material Technology Co.,Ltd.,Hami 839000,China)

机构地区：[1]新疆湘润新材料科技有限公司,新疆维吾尔自治区哈密839000

出　　处：《锻压技术》2024年第3期202-206,共5页Forging & Stamping Technology

基　　金：自治区重点研发任务专项(2022B01029)。

摘　　要：研究了不同热处理制度对Gr.38钛合金板材显微组织和力学性能的影响。结果表明:低温普通退火处理对Gr.38钛合金板材的组织和力学性能影响不大;两相区固溶时效处理可以大幅度提高Gr.38钛合金板材的抗拉强度和硬度,但其塑性和冲击韧性下降显著;固溶后水冷较空冷可以获得更细的次生α相和相对更少的初生α相,Gr.38钛合金板材的抗拉强度和硬度更高;通过控制时效温度可以调整次生α相的片层厚度,时效温度越高,合金的抗拉强度和硬度越低,塑性和冲击韧性越高。Gr.38钛合金板材具有较好的防弹性能,采用普通退火工艺获得的板材防弹性能最佳。The influences of different heat treatment systems on the microstructure and mechanical properties of Gr.38 titanium alloy plates were studied.The results show that the low temperature general annealing treatment has little effect on the microstructure and mechanical properties of Gr.38 titanium alloy plate.The tensile strength and hardness of Gr.38 titanium alloy can be greatly improved by solution and aging treatment in two-phase zone,but its plasticity and impact toughness decrease significantly.After solution treatment,finer secondaryαphase and less primaryαphase are obtained by water cooling than air cooling,and the tensile strength and hardness of Gr.38 titanium alloy are higher.The lamellar thickness of secondaryαphase can be adjusted by controlling the aging temperature.The higher the aging temperature is,the lower the tensile strength and hardness of alloy are,but the higher the plasticity and impact toughness are.Gr.38 titanium alloy plate has better bulletproof performance,and the best bulletproof performance is obtained by general annealing process.

关 键 词：Gr.38钛合金 低温普通退火 固溶时效 时效温度 防弹性能 

分 类 号：TG335.5[金属学及工艺—金属压力加工]