化工冶金跨行业耦合二氧化碳循环利用技术  

Cross-industry coupling carbon dioxide recycling technology in chemicaland metallurgy

作　　者：李双德[1,2] 李振荣 董笑[4] 陈为 刘一凡 李少鹏 程景才[1] 李会泉[1,2] 陈运法[1,2] LI Shuangde;LI Zhenrong;DONG Xiao;CHEN Wei;LIU Yifan;LI Shaopeng;CHENG Jingcai;LI Huiquan;CHEN Yunfa(Institute of Process Engineering,Chinese Academy of Sciences,Beijing 100190,China;University of Chinese Academy of Sciences,Beijing 100049,China;Institute of Coal Chemistry,Chinese Academy of Sciences,Taiyuan 030001,China;Shanghai Advanced Research Institute,Chinese Academy of Sciences,Shanghai 201210,China)

机构地区：[1]中国科学院过程工程研究所,北京100190 [2]中国科学院大学,北京100049 [3]中国科学院山西煤炭化学研究所,山西太原030001 [4]中国科学院上海高等研究院,上海201210

出　　处：《洁净煤技术》2024年第4期171-178,共8页Clean Coal Technology

基　　金：中国科学院A类战略性先导科技专项资助项目(XDA0390400)。

摘　　要：双碳战略是国家重大战略,也是推动国家经济高质量可持续发展的必由之路。我国碳达峰到碳中和时间短、任务重。我国化工冶金每年碳排放约36亿t,约占全国工业碳排放量的36%,此外化工冶金废气、固废、废热产生量大、堆存量多、难利用、循环利用率低。发展化工冶金低碳化转型和变革,是我国工业领域双碳目标实现的根本保证。我国化工冶金历时百年,已发展成熟,仅通过原料燃料替代及绿色工艺转型减碳容量有限,亟需开展化工冶金跨行业耦合与循环利用技术变革,深入推动工业领域减碳。我国化工冶金大多是孤立、非循环连续工艺过程,引起跨行业耦合难、循环利用难度大的问题。针对上述问题,首先分析了化工冶金行业碳排放治理现状及国家战略需求;其次,提出了废气与废热耦合热化学转化制高质气体、废气与废气耦合定向催化制高端化学品、废气与固废耦合制低碳材料3个减碳增效策略。结合其技术发展现状和趋势,提出了拟重点发展的化工冶金跨行业耦合二氧化碳循环利用技术,以期为工业低碳绿色发展提供支撑。The dual carbon strategy is a major national strategy,which will also promote the high-quality and sustainable development of the national economy.The time of China′s carbon peak to carbon neutrality is short and the task is heavy.Carbon dioxide emissions from chemical and metallurgy in China are about 3.6 billion tons per year,accounting for about 36%of the country′s industrial carbon emissions.In addition,waste gas,solid waste,waste heat generation from chemical and metallurgical possess large heap stock,difficult to use,low recycling rate.The development of low-carbon transformation and revolution of chemical and metallurgy is the fundamental guarantee for the realization of the dual carbon goal in China′s industrial field.Most of China′s chemical and metallurgy are mature processes of more than 100 years,and the carbon reduction capacity is limited only through raw material and fuel substitution,together with green process transformation,so it is urgent to carry out cross-industry coupling and recycling technology of chemical and metallurgy,which can further promote carbon reduction in these industrial field.Most of China′s chemical and metallurgy are isolated,non-cyclic continuous processes,which will cause the difficult of cross-industry coupling and recycling.In response to the above problems,the current situation of the control for carbon emission and national strategic for the realization of the dual carbon goal in chemical and metallurgy were firstly analyzed.Secondly,three strategies for carbon reduction and efficiency improvement were proposed:The coupling of waste gas and waste heat for transferring into high-quality gas,the coupling of waste gas and waste gas to produce high-end chemicals,and the coupling of waste gas and solid waste to produce low-carbon based materials.Finally,in order to provide support for the low-carbon and green development of industry,the specific technology for cross-industry coupling carbon dioxide recycling of chemical and metallurgy were proposed.

关 键 词：化工冶金 二氧化碳 碳减排 跨行业耦合 循环利用 

分 类 号：TD98[矿业工程—选矿]