检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:赵炳震 杜颜胜 李存良 郭晓程 王晓龙 王建涛 赵中伟 ZHAO Bingzhen;DU Yansheng;LI Cunliang;GUO Xiaocheng;WANG Xiaolong;WANG Jiantao;ZHAO Zhongwei(Shaanxi Construction Engineering Group Co.LTD.,Xi'an 710000,China;Department of Civil Engineering,Tianjin University,Tianjin 300072,China;Xi'an Rail Transit Group Co.,LTD,Xi'an 710018,China;Department of Civil Engineering,Xi'an University of Architecture and Technology,Xi'an 710054,China;Liaoning Technical University School of Civil Engineering,Fuxin 123000,China)
机构地区:[1]陕西建工集团股份有限公司,西安710000 [2]天津大学建筑工程学院,天津300072 [3]西安市轨道交通集团有限公司,西安710018 [4]西安建筑科技大学土木工程学院,西安710054 [5]辽宁工程技术大学土木工程学院,阜新123000
出 处:《结构工程师》2024年第2期33-41,共9页Structural Engineers
基 金:陕西省自然科学基础研究计划(2024JC-YBQN-0509),陕西省交通运输厅交通科研项目(23-49)。
摘 要:为了揭示随机锈蚀对H型钢柱在偏压作用下极限承载能力的影响,采用随机有限元方法对随机点蚀钢柱的抗弯承载力的变化规律进行了研究,考虑了轴压比、几何参数以及锈蚀深度对H型钢柱抗弯承载力折减系数的影响;得到了不同几何尺寸下H型钢柱的适用性,揭示了折减系数随锈蚀深度的变化规律,提出了用于预测抗弯承载力折减系数的理论计算公式。结果表明,所提出的理论公式可以准确预测随机点蚀H型钢柱的抗弯承载力,可为评估既有H型钢柱的极限承载力提供理论基础。The variation law of flexural bearing capacity of random pitting steel columns was studied based on the stochastic finite element method to reveal the influence of random corrosion on the ultimate bearing capacity of H-shaped steel columns under eccentric compression.The effects of axial compression ratio,geometrical parameters and corroded depth on the reduction factor of bending capacity for H-shaped steel columns were considered.The applicability of the conclusions of this paper to H-shaped steel columns with different geometrical sizes was obtained.The variation of the reduction factor with the corroded depth was revealed,and the theoretical calculation formula for predicting the reduction factor of bending capacity was proposed.The results indicate that the proposed theoretical formula can accurately predict the bending capacity of H-shaped steel columns with random pitting corrosion.The conclusions of this work can provide help for evaluating the service life and maintenance of existing H-shaped steel members.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15