两种典型橡胶衬套在不同荷载下的动刚度特性  

Dynamic Stiffness Property under Different Preloads for Two Typical Rubber Bushings

作　　者：缪亚东 MIAO Yadong(Product Development Center,Vibracoustic(Wuxi)Vibration Isolators Company Limited,Wuxi 214112,China)

机构地区：[1]无锡威巴克减震器有限公司产品开发部,江苏无锡214112

出　　处：《汽车实用技术》2024年第9期6-9,共4页Automobile Applied Technology

摘　　要：驱动电机总成悬置系统的隔振性能对整车噪声、振动与声振粗糙度(NVH)性能有着重要的影响意义。目前纯电动汽车悬置普遍采用橡胶衬套类结构,结构相对简单,但对其动刚度性能要求高。文章选取两种典型的橡胶衬套,利用有限元技术详细分析了两种衬套在不同荷载下的动刚度表现形式,并着重分析对比了第一个峰值位置与不同预载的关系。分析结果表明,同为衬套类结构,因结构不同,其动刚度表现特性差别较大。The vibration isolation performance of the mounting system of the drive motor assembly has an important influence on the noise,vibration and harshness(NVH)of the vehicle.Rubber bush is used commonly in electric vehicles,which is simple in design,but has high requirements for its dynamic stiffness performance.Two typical rubber bush are selected in this article,and compared the dynamic stiffness curve under different preloads by finite element analysis.Especially analyze the difference how the preloads affect the first peak positions.Results show that the dynamic stiffness performance characteristics vary greatly due to different structures.

关 键 词：橡胶衬套 动刚度 NVH 有限元分析 

分 类 号：U463[机械工程—车辆工程]