检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈杰凤 CHEN Jiefeng(China Mobile CommunicationsGroup Yunnan Co.,LTD.,KunmingYunnan,650000,China)
机构地区:[1]中国移动通信集团云南有限公司,云南昆明650000
出 处:《长江信息通信》2024年第4期190-193,共4页Changjiang Information & Communications
摘 要:由于光纤通信工程的实施需要复杂的光缆线路敷设施工,难以保障光缆线路敷设的质量,设计面向光纤通信工程的光缆线路敷设管理系统。硬件上,选择树莓派3B+作为主控芯片,采用GTLD-5CAPDSU组合光器件作为OTDR的核心器件。软件上,在光纤通信工程准备阶段通过蚁群算法规划光缆线路敷设路径;在光纤通信工程施工阶段基于三点时间估算法对光缆线路敷设进度进行管控;在光纤通信工程竣工阶段使用OTDR探测技术检测光缆线敷设质量。测试结果表明,设计系统可以对光缆线路敷设故障作出响应,并根据OTDR探测信号对故障准确定位,进而保障敷设质量。Because the implementation of optical fiber communication engineering nceds complex optical cable laying construction,it is difficult to guarantec the quality of optical cable laying,and the optical cable laying management system for optical fiber communication engineering is designcd.In terms of hardware,Raspberry PI 3B+was selected as the master chip,and GTLD-5CAPDSU combined optical device was used as the core device of OTDR.In software,the optical cable line laying path is planned by the ant colony algorithm in the preparation stage of optical fiber communication engincering,controls the laying progress of optical cable line based on the threc-point time estimation method in the construction stage of optical fiber communication engineering,and uses OTDR detection technology to test the laying quality of optical cable.The test results show that the design system can respond to the fault of the optical cable line laying,and accurately locate the fault according to the OTDR detcction signal,so as to ensure the laying quality.
关 键 词:光纤通信工程 光缆线路 线路敷设 管理系统 系统设计
分 类 号:TP399[自动化与计算机技术—计算机应用技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.170