石墨烯改性环氧富锌底漆拉开法附着力试验影响因素分析  

Analysis of Influencing Factors of Graphene Modified Epoxy Zinc-Rich Primer Adhesion Test by Pulling Method

作　　者：张东晋川 孙庆华 黄选民 杨成龙 冯琛玉 Zhang Dongjinchuan;Sun Qinghua;Hang Xuanmin;Yang Chenglong;Feng Chenyu(State-Owned Kawanishi Machine Factory,Chengdu Sichuan 611937,China)

机构地区：[1]国营川西机器厂,四川成都611937

出　　处：《上海涂料》2024年第2期41-44,共4页Shanghai Coatings

摘　　要：对石墨烯环氧富锌底漆拉开法附着力进行测试,分析了试样组合方式、喷涂压力、胶黏剂和试柱材质的选择对试验结果的影响。结果表明:当选择测量不确度定最小的双面试柱试样组合、喷涂压力为0.3 MPa、HY-914环氧胶黏剂和钢试柱时,可保证试验结果的可靠性高,数据波动小。In this paper,the effects of specimen combination,spraying pressures,adhesives and test columns material on the test results were analyzed during the graphene epoxy zinc-rich primer pull-off adhesion test.The results showed that when the two-sided test columns sample combination with the least measurement uncertainty,0.3 MPa spraying pressure,HY-914 epoxy adhesive and steel test column were chosen,the test results have high reliability and small fluctuating.

关 键 词：涂层 拉开法附着力 试柱 试验 

分 类 号：TQ630.72[化学工程—精细化工]