检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄奎林[1,2] 李华 宋东东 王云田 牛世伟 Huang Kuilin;Li Hua;Song Dongdong;Wang Yuntian;Niu Shiwei(School of Mechanical and Electrical Engineering,Southwest Petroleum University,Chengdu 610500,P.R.China;School of Petroleum and Natural Gas Engineering,Southwest Petroleum University,Chengdu 610500,P.R.China;West Sichuan Drilling Company of CNPC Chuanqing Drilling Engineering Co.,Ltd.,Chengdu 610057,P.R.China)
机构地区:[1]西南石油大学机电工程学院,成都610500 [2]西南石油大学石油与天然气工程学院,成都610500 [3]中国石油集团川庆钻探工程有限公司川西钻探公司,成都610057
出 处:《地下空间与工程学报》2024年第2期527-534,555,共9页Chinese Journal of Underground Space and Engineering
基 金:四川省自然科学基金(2022NSFSC0265);油气藏地质及开发工程国家重点实验室开放基金(PLN-2022-29);南充市-西南石油大学市校科技战略合作项目(23XNSYSX0018)。
摘 要:针对页岩气钻采中定向钻进的PDC钻头扭矩波动大、冲击振动大、工具面不稳定等问题,笔者提出一种刀翼上设置有双侧支撑的滚轮新结构钻头,通过滚轮单元破岩实验以及全钻头钻进破岩实验来开展新型钻头减扭、缓冲机理研究,主要研究6种滚轮轮廓形状、4种滚轮的吃入深度、6种滚轮径向位置、7种PDC齿相对高度等因素对新型钻头扭矩、钻压的影响规律。结果表明:6种轮廓滚轮的等效摩擦系数均低于PDC齿,且为PDC齿的18.65%~43.73%,得出滚轮减扭能力高于PDC齿;6种不同径向位置的滚轮缓冲能力均强于PDC齿,为PDC齿的1.59~9.17倍,滚轮式PDC钻头的扭矩为常规PDC钻头的71.72%~98.33%;随着滚轮与PDC齿相对高度的减小,钻头扭矩逐渐减小,滚轮钻压的占比也逐渐增加,钻头减扭能力、缓冲能力均增加,为适用于页岩气钻采的新型钻头产品设计与研制提供理论支撑。In view of the problems such as large torque fluctuation,large impact vibration and unstable tool surface of PDC bits for directional drilling in shale gas drilling and production,the author proposes a new roller structure bit with bilateral supports on the blade.Through rock breaking experiment of roller unit and rock breaking experiment of full bit drilling,the mechanism of new bit torque reduction and buffering is studied,mainly including 6 roller profile shapes,4 roller pressing depths,6 roller radial positions The influence of the relative height of 7 kinds of PDC teeth on the torque and WOB of the new drill bit.The results show that the equivalent friction coefficients of the six contour rollers are lower than those of the PDC teeth,and are 18.65%~43.73%of the PDC teeth;The buffering capacity of roller at six different radial positions is stronger than that of PDC teeth,which is 1.59~9.17 times of that of PDC teeth.The torque of roller PDC bits is 71.72%~98.33%of that of conventional PDC bits;With the reduction of the relative height of the roller and PDC teeth,the bit torque gradually decreases,the proportion of the roller weight on bit also gradually increases,and the bit torque reduction capacity and buffering capacity increase,providing theoretical support for the design and development of new bit products suitable for shale gas drilling and production.
分 类 号:TE921[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222