检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:何永宏[1] 李桢 樊建明[2,3] 张超 张旭泽[2,3] 马兵 He Yonghong;Li Zhen;Fan Jianming;Zhang Chao;Zhang Xuze;Ma Bing(PetroChina Changqing Oilfield Company,Shaanxi Xi'an 710018,China;Research Institute of Exploration and Development,PetroChina Changqing Oilfield Company,Shaanxi Xi'an 710018,China;National Engineering Laboratory for Exploration and Development of Low-Permeability Oil&Gas Fields,Shaanxi Xi'an 710018,China;Oil&Gas Technology Research Institute,PetroChina Changqing Oilfield Company,Shaanxi Xi'an 710018,China)
机构地区:[1]中国石油长庆油田公司,陕西西安710018 [2]中国石油长庆油田公司勘探开发研究院,陕西西安710018 [3]低渗透油气田勘探开发国家工程实验室,陕西西安710018 [4]中国石油长庆油田公司油气工艺研究院,陕西西安710018
出 处:《石油学报》2024年第4期683-697,共15页Acta Petrolei Sinica
基 金:中国石油天然气股份有限公司攻关性应用性科技专项“陆相页岩油开发优化技术研究与试验”(2023ZZ15YJ03);中国石油长庆油田公司重大专项“鄂尔多斯盆地页岩油渗流机理及有效开发关键技术研究”(2023DZZ04)资助。
摘 要:鄂尔多斯盆地庆城页岩油纵向油层多期叠置,横向非均质性强、变化快,开发井网优化难度大。针对庆城页岩油地质特征,为实现储量动用程度最大化,综合利用矿场实践、油藏工程和数值模拟等方法对水平段方位、长度、井距和立体开发井网合理隔层开展了系统研究。研究结果表明:水平井的方位主体采用与最大主应力方向垂直的方案,但在靶前区、地面受限区要综合考虑砂体展布方向、地下储量动用程度和地面井场位置,水平段布井方位可以适当偏转;优化水平段长度主体为1 500 m,受砂体延伸长度短影响的水平段长度为600~800 m;优化单井控制储量为(25~30)×10^(4)t,主体井距为500 m,不同油层厚度部署区有所差异;纵向上隔层厚度大于10 m的油层段开展立体开发。基于以上研究,形成了页岩油多层系立体式布井模式。研究成果支撑庆城油田页岩油单井EUR达到(2.6~2.8)×10^(4)t,产油量达到165×10^(4)t/a,实现了规模效益开发。The shale oil reservoirs in Qingcheng oilfield,located in Ordos Basin,are characterized by multiple periods of vertically stacked oil layers and strong lateral heterogeneity,making it challenging to optimize the development well pattern.Based on considering the geological characteristics of shale oil reservoirs in Qingcheng oilfield,and comprehensively using the methods of oilfield application,reservoir engineering and numerical simulation,a systematic study was conducted on the orientation,length,well spacing,three-dimensional well pattern development,and reasonable stratification of the horizontal section,so as to maximize the utilization of reserves.The results show that the main orientation of horizontal wells should be perpendicular to the maximum principal stress direction;however,taking into account the distribution direction of sand bodies,the utilization of underground reserves,and the location of surface well site,the orientation of wells in horizontal section can be appropriately deviated in the target front area and restricted surface area.The optimal length of horizontal section is mainly 1 500 m,and the length of the horizontal section affected by the extension of sand body is within the range of 600 m to 800 m.The optimized controllable reserves per well is(25-30)× 10^(4) t,and generally the well spacing is 500 m;there are various deployment areas in the oil layers of different thickness.The three-dimensional development technique is applied for the oil layers with a vertically stratified thickness greater than 10 m.Based on the above study,a three-dimensional well pattern has been established for the multi-layered shale oil reservoirs.The research results present a single well estimated ultimate recovery(EUR)of(2.6-2.8)× 10^(4) t and an annual oil production of 165×10^(4) t in Qingcheng oilfield,achieving large-scale efficient development.
关 键 词:鄂尔多斯盆地 庆城油田 页岩油 开发井网 优化技术 实践
分 类 号:TE349[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49