A Comprehensive Investigation on Shear Performance of Improved Perfobond Connector  

作　　者：Caiping Huang Zihan Huang Wenfeng You 

机构地区：[1]School of Civil Engineering,Architecture and Environment,Hubei University of Technology,Wuhan,430068,China

出　　处：《Structural Durability & Health Monitoring》2024年第3期299-320,共22页结构耐久性与健康监测（英文）

摘　　要：This paper presents an easily installed improved perfobond connector (PBL) designed to reduce the shearconcentration of PBL. The improvement of PBL lies in changing the straight penetrating rebar to the Z-typepenetrating rebar. To study the shear performance of improved PBL, two PBL test specimens which containstraight penetrating rebar and six improved PBL test specimens which contain Z-type penetrating rebars weredesigned and fabricated, and push-out tests of these eight test specimens were carried out to investigate andcompare the shear behavior of PBL. Additionally, Finite Element Analysis (FEA) models of the PBL specimenswere established and validated against the test results. Through FEA, the effects of concrete grade, perforatedplate’s aperture, Z-type penetrating rebar’s diameter, Z-type penetrating rebar’s bending angle, and bending lengthon shear behaviors were discussed. The results indicate that (1) Compared with PBL specimens with straightpenetrating rebars, Z-type penetrating rebar can significantly improve the shear resistance and shear stiffnessof the specimens. This enhanced performance can be mainly attributed to the increased adhesion of the transverserebar. (2) By comparing the load-slip curve, the slip of PBL test specimens which contain straight penetratingrebar increases rapidly and the bearing capacity decreases rapidly after concrete craking, while the bearingcapacity of Z-type penetrating rebar specimens decreases first and then increases gradually, showing betterductility. (3) The stress of the PBL shear connector with Z-type penetrating rebar is more uniform than thePBL shear connector with straight penetrating rebar, and the overall deformation is more uniform. (4) The higherthe concrete grade, the higher the shear bearing capacity and the better ductility of the new PBL. Increasing theaperture of the perforated plate or the diameter of the rebar has a very limited effect on the improvement of theshear capacity of PBL. Through the systematic analysis of the mechanical properties

关 键 词：PBL penetrating rebar push-out test load-slip curve shear capacity finite element analysis 

分 类 号：TU432[建筑科学—岩土工程]