发射鼓轮拆装维保装置设计  

作　　者：毛思睿 李星珂 阳礼鹏 缪夔 曹坤 

机构地区：[1]湖北中烟工业有限责任公司武汉卷烟厂,武汉430000

出　　处：《科技创新与应用》2024年第15期124-127,共4页Technology Innovation and Application

摘　　要：为解决在对发射鼓轮进行拆装与维保工作时,由于定位轮、转动轮、圆柱滚子轴承等零部件的配合精度要求高,而引起的定位轮及圆柱滚子轴承等零部件易损坏、维修精度低、维修时间长等问题,设计制作专用的发射鼓轮拆装维保装置,优化发生鼓轮定位轮和圆柱滚子轴承的拆装方法,实现在不影响定位轮表面精度的情况下,固定发射鼓轮,同时提升维修精度,节约维修时间,达到提高滤棒风送系统稳定性的目的。以ZF25型滤棒发射接收机组为对象进行测试,结果表明使用发射鼓轮拆装维保装置后,发射鼓轮拆装与维保平均所需时间与维保次数较原方法有明显的降低,发射机的发射率显著提高。该技术可以为提高滤棒风送系统发射率提供支持。In order to solve the problems caused by the high matching accuracy of parts such as positioning wheel,rotating wheel and cylindrical roller bearing,such as easy damage,low maintenance precision and long maintenance time,a special launching drum disassembly and maintenance device is designed and made,and the disassembly and assembly method of drum locating wheel and cylindrical roller bearing is optimized.Without affecting the surface accuracy of the positioning wheel,the launch drum is fixed,at the same time,the maintenance accuracy is improved,the maintenance time is saved,and the stability of the filter rod air delivery system is improved.The ZF25 filter rod transmitting and receiving unit is tested.The results show that after using the launching drum to disassemble and install the maintenance device,the average time and times of disassembly and maintenance of the launching drum are significantly lower than those of the original method,and the emissivity of the transmitter is significantly increased.This technology can provide support for improving the emissivity of the filter rod air delivery system.

关 键 词：发射鼓轮 定位轮 圆柱滚子轴承 固定装置 拆装维保装置 

分 类 号：TS43[农业科学—烟草工业]