添加碳粉对AZ91镁合金微观组织与力学性能的影响  

Effect of Adding Carbon Powder on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy

作　　者：王殿君 胡茂良[2] 张明秋 王洪英 张吉生 高恩达 WANG Dianjun;HU Maoliang;ZHANG Mingqiu;WANG Hongying;ZHANG Jisheng;GAO Enda(School of Modern Manufacturing Engineering,Heilongjiang Institute of Technology,Jixi 158100,China;School of Materials Engineering and Chemical Engineering,Harbin University of Science and Technology,Harbin 151000,China)

机构地区：[1]黑龙江工业学院现代制造工程学院,黑龙江鸡西158100 [2]哈尔滨理工大学材料工程与化工学院,黑龙江哈尔滨151000

出　　处：《热加工工艺》2024年第3期135-139,144,共6页Hot Working Technology

基　　金：黑龙江省自然科学基金项目(LH2019E117)。

摘　　要：研究了不同含量的碳粉细化剂对AZ91镁合金的显微组织与力学性能的影响规律。对AZ91合金进行微观组织观察、SEM分析和力学性能测试。结果表明:随着细化剂含量的增加,AZ91合金的晶粒尺寸显著减小。当添加0.5wt%细化剂时,AZ91合金的晶粒尺寸减小到184μm,细化效率达到了67%。当添加0.3wt%细化剂时,AZ91合金的抗拉强度和伸长率达到最高的150MPa和2.1%,相比于未添加细化剂的,其分别提升了28%和50%。C元素与Al元素反应得到了Al_(4)C_(3)相,可以作为AZ91合金的异质形核位点,起到了晶粒细化的作用,并显著提升AZ91合金的力学性能。The effect of different content of carbon powder refiner on the microstructure and mechanical properties of AZ91 magnesium alloy was studied.The microstructure observation,SEM analysis and mechanical property test of AZ91 alloy were carried out.The results show that with the increase of the refiner content,the grain size of AZ91 alloy decreases significantly.When 0.5wt%refiner is added,the grain size of AZ91 alloy is reduced to 184μm,and the refinement efficiency reaches 67%.When 0.3wt%refining agent is added,the tensile strength and elongation of AZ91 alloy reach the highest of 150 MPa and 2.1%,which are increased by 28%and 50%,respectively,compared with those without adding refining agent.The Al_(4)C_(3) phase is obtained by the reaction of C element and Al element,which can be used as the heterogeneous nucleation site of AZ91 alloy,and it plays a role in grain refinement,and significantly improves the mechanical properties of AZ91 alloy.

关 键 词：AZ91镁合金 碳质细化剂 晶粒细化 力学性能 

分 类 号：TG292[金属学及工艺—铸造] TG146.22[一般工业技术—材料科学与工程]