基于改进型M2PC控制方法的MC-PMSM控制系统  

MC-PMSM Control System Based on Improved M2PC Control Method

作　　者：田军明 程启明 张昕 叶培乐 程尹曼 TIAN Junming;CHENG Qiming;ZHANG Xin;YE Peile;CHENG Yinman(Xishuangbanna Power Supply Bureau,Yunnan Power Grid Co.,Ltd.,Jinghong 666100,China;School of Automation Engineering,Shanghai Electric Power University,Shanghai 200090,China;Shibei Power Supply Branch,Shanghai Electric Power Company,Shanghai 200041,China)

机构地区：[1]云南电网有限责任公司西双版纳供电局,景洪666100 [2]上海电力大学自动化工程学院,上海200090 [3]上海电力公司市北供电分公司,上海200041

出　　处：《高电压技术》2024年第5期2097-2106,I0027-I0029,共13页High Voltage Engineering

基　　金：国家自然科学基金(61905139)。

摘　　要：针对传统的模型预测控制(model predictive control,MPC)方法、调制模型预测控制(modulation MPC,M2PC)存在的问题,提出改进型M2PC方法,并用于矩阵变换器(matrix converter,MC)-永磁同步电机(permanent magnet synchronous motor,PMSM)系统控制。首先,给出了MC-PMSM的拓扑结构,分析了基于传统MPC、M2PC方法的MC-PMSM控制系统及其存在的问题;接着,提出了基于改进型M2PC方法,该方法不但能够固定开关频率,还能降低计算量和改善波形质量;最后,在RTDS平台上对MC-PMSM系统采用改进型M2PC方法进行仿真,并与采用传统的MPC、M2PC方法进行了比较。结果表明,所提改进型M2PC方法的控制性能优于传统的MPC、M2PC方法。Aiming at the problems existing in the traditional model predictive control(MPC)method and modulation model predictive control(M2PC)method,we put forward an improved M2PC method and apply it to the matrix converter(MC)-permanent magnet synchronous motor(PMSM)system control.Firstly,the topology of MC-PMSM is given,and the existing problems of MC-PMSM control system based on traditional MPC and M2PC methods are analyzed.Then,a solution based on the improved M2PC method is proposed,which can not only fix the switching frequency,but also reduce the amount of calculation and improve the waveform quality.Finally,the MC-PMSM system is simulated on the RTDS platform using the improved M2PC method,and compared with the traditional MPC and M2PC methods.The results show that the control performance of the proposed improved M2PC method is superior to the traditional MPC and M2PC methods.

关 键 词：矩阵变换器 调制型模型预测控制 空间矢量调制 价值函数 永磁同步电机 

分 类 号：TM341[电气工程—电机] TP273[自动化与计算机技术—检测技术与自动化装置]