基于统计分析的卷烟设备烟支质量控制参数研究  

Research on Cigarette Weight Control Parameters of Cigarette Equipment Based on Statistical Analysis

作　　者：杨云凯 唐海军 黄刚 宋林 YANG Yunkai;TANG Haijun;HUANG Gang;SONG Lin(Qingzhou Cigarette Factory,Shandong Zhongyan Industry Co.,Ltd.,Weifang,Shandong 262500,China)

机构地区：[1]山东中烟工业有限责任公司青州卷烟厂,山东潍坊262500

出　　处：《农产品加工》2024年第9期70-74,共5页Farm Products Processing

摘　　要：使用DOE统计分析方法,借助Minitab16软件进行数据分析,在ZJ112型卷烟机其他参数不变的情况下,对影响该卷接机组烟支质量的控制参数进行组合试验,记录结果并进行拟合模型,然后对模型进行优化,找到最佳组合。结果表明,针辊转速补偿系数为47%,标准斜率约为0.95,超重超轻烟支剔除范围为±60 mg时最为稳定。验证后实施改进,泰山(D)烟支质量过程能力提高到1.1以上,烟支质量稳定性显著提升。This paper used the DOE statistical analysis method and the Minitab16 software to analyze the data.Under the condition that other parameters of the ZJ112 cigarette machine remain unchanged,the combination test was carried out on the control parameters that affect the cigarette weight of the cigarette unit.The results were recorded and the model was fitted.Then the model was optimized to find the best combination.The results showed that the speed compensation coefficient of needle roller was 47%,the standard slope was about 0.95,and the removal range of overweight and ultralight cigarettes was±60 mg,which is the most stable.After validation,the improvement was implemented,and the weight process capability of Taishan(D)cigarettes was improved to more than 1.1,and the weight stability of cigarettes was significantly improved.

关 键 词：DOE 卷接机组 控制参数 质量稳定性 

分 类 号：TS452[农业科学—烟草工业]