基于混凝-Fenton-A/O联合工艺的环氧树脂生产废水处理研究  

Research on the Treatment of Epoxy Resin Production Wastewater Based on Coagulation-Fenton-A/O Combined Process

作　　者：余敏 蒋莎莎 王骏 Yu Min;Jiang Shasha;Wang Jun(Zhejiang Xiushui Environmental Protection Co.,Ltd.,Hangzhou Zhejiang 310000,China;Wenling City Environmental Comprehensive Improvement Affairs Center,Taizhou Zhejiang 317500,China;Zhejiang Jiaoke Environmental Technology Co.,Ltd.,Hangzhou Zhejiang 310000,China)

机构地区：[1]浙江秀水环保有限公司,浙江杭州310000 [2]温岭市环境综合整治事务中心,浙江台州317500 [3]浙江交科环境科技有限公司,浙江杭州310000

出　　处：《山西化工》2024年第5期227-228,243,共3页Shanxi Chemical Industry

摘　　要：某工业园区的废水原始排放已满足排放标准,但需要满足更严格的纳管要求。为了进一步提高生产废水处理效能,研究采用了混凝-Fenton-A/O联合工艺进行小规模试验。通过对混凝-Fenton-A/O联合工艺处理环氧树脂生产废水指标进行连续检测,出水COD、氨氮、BOD_(5)去除率分别为92.9%、75%、87.7%,出水指标均满足工业废水纳管标准。The original discharge of wastewater in a certain industrial park has met the discharge standards,but it needs to meet stricter management requirements.In order to further improve the efficiency of production wastewater treatment,a small-scale experiment was conducted using the coagulation-Fenton-A/O combined process.Through continuous testing of the indicators of the coagulation Fenton-A/O combined process for treating epoxy resin production wastewater,the removal rates of COD,ammonia nitrogen,and BOD_(5) in the effluent were 92.9%,75%,and 87.7%,respectively.The effluent indicators all met the industrial wastewater management standards.

关 键 词：环氧树脂 生产废水 混凝 FENTON A/O工艺 

分 类 号：X703[环境科学与工程—环境工程]