用磁阵列传感器去偏心误差的非接触式电流测量方法  

Non-contact current measurement method for removing eccentricity error with magnetic array sensors

作　　者：吴远密 许守东 姜孟 张文斌[3] 程康 WU Yuanmi;XU Shoudong;JIANG Meng;ZHANG Wenbin;CHENG Kang(Xishuangbanna Power Supply Bureau,Yunnan Power Grid Corporation,Jinghong 666100,Yunnan;Electric Power Research Institute of Yunnan Power Grid Co Ltd,Kunming 650214,China;School of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650504,China)

机构地区：[1]云南电网公司西双版纳供电局,云南景洪666100 [2]云南电网有限责任公司电力科学研究院,云南昆明650214 [3]昆明理工大学机电工程学院,云南昆明650504

出　　处：《传感器与微系统》2024年第6期133-136,共4页Transducer and Microsystem Technologies

基　　金：云南电网有限责任公司科技项目(YWKJXM20210013);云南省首批揭榜制科技项目(202104BN050011)。

摘　　要：磁性传感器圆形阵列是电流非接触式测量的有效方法,因为它成本低、重量轻、线性范围大、带宽宽和噪声低。针对现有阵列式电流传感器测量偏心时存在较大电流测量误差的问题,采用一种基于导线偏心位置的区域层次分析方法。通过对载流导线不同偏心位置,赋予磁传感器不同的权重进行输出叠加,与导线中心位置输出进行对比,求得最大相对误差为1.28%,传感器线性误差为1.04%,克服了导线偏心对电流测量误差的影响,证明了该方法的可行性。A circular array of magnetic sensors is an effective method for non-contact measurement of current due to its low cost,light-weight,large linear range,wide bandwidth,and low noise.In view of large current measurement error of the existing array current sensor while measuring eccentricity,a region-hierarchical analysis method based on the eccentric position of the wire is adopted.By superimposing the output of different weights of the magnetic sensor on different eccentric positions of the current-carrying conductor,and comparing it with the output of the center position of the wire,the maximum relative error is 1.28%and the linear error of the sensor is 1.04%,which overcomes the influence of wire eccentricity on the current measurement error,and the feasibility of the method is proved.

关 键 词：圆形阵列 电流测量 非中心 磁通门传感器 非接触式 

分 类 号：TP212[自动化与计算机技术—检测技术与自动化装置] TM835[自动化与计算机技术—控制科学与工程]