基于UG NX软件往复铣削不抬刀的程序研究  

Program research on reciprocating milling without tool lifting based on UG NX software

作　　者：曹耀辉 周乃军 Cao Yaohui;Zhou Naijun(Yiyang Rubber&Plastics Machinery Group Co.LTD.,Yiyang 413000,Hunan,China)

机构地区：[1]益阳橡胶塑料机械集团有限公司,湖南益阳413000

出　　处：《橡塑技术与装备》2024年第6期59-64,共6页China Rubber/Plastics Technology and Equipment

摘　　要：针对往复铣削过程中的重复抬刀问题进行分析,结合UG/NX12.0软件建立三维模型编制刀路轨迹进行研究,主要提供了三种方法,并进行了比对,实现了面铣加工中不抬刀,缩短了加工时间,减少了机床的不必要移动,提高了生产效率,对实际加工有着重要的意义。This article analyzes the problem of repeated tool lifting in the reciprocating milling process,and combines UG/NX12.0 software to establish a three-dimensional model to compile the tool path trajectory for research.Three methods were mainly provided and compared in this article,which achieved no lifting of the tool in surface milling processing,shortened processing time,reduced unnecessary movement of the machine tool,and improved production efficiency,which is of great significance for practical processing.

关 键 词：往复铣削 抬刀 UG/NX 

分 类 号：TQ330.41[化学工程—橡胶工业]