聚乳酸柔性定形相变薄膜的制备及性能研究  

Preparation and Properties of Poly(Lactic Acid)Flexible Shaped Phase Change Films

作　　者：吴学红 栾林林 赵敏 陈亚南 吕财 刘勇 常志娟 李文浩 WU Xuehong;LUAN Linlin;ZHAO Min;CHEN Yanan;LU Cai;LIU Yong;CHANG Zhijuan;LI Wenhao(Zhengzhou University of Light Industry,Zhengzhou 450000,China)

机构地区：[1]郑州轻工业大学,郑州450000

出　　处：《工程热物理学报》2024年第5期1458-1463,共6页Journal of Engineering Thermophysics

基　　金：国家自然科学基金(No.51476149);河南省中原科技创新领军人才项目(No.234200510011);河南省科技攻关项目(No.232102321089);郑州市协同创新专项(校重大重点项目培育)(No.2021ZDPY0107)。

摘　　要：为解决相变材料易泄漏和力学性能差的问题,以聚乳酸(PLA)为基底,聚乙二醇(PEG)为相变工质,制备PEG/PLA相变薄膜。对其热性能和力学性能进行测试,结果表明,PLA作为支撑基底有效防止了PEG液体的泄漏。PEG/PLA配比为180/100时,相对焓效率最高,达到103.87%,其熔融和凝固过程中的潜热分别为128.5J·g^(-1)和120.2J·g^(-1)。随着PEG比例的增加,薄膜的杨氏模量逐渐减小,PEG/PLA配比为180/100时,杨氏模量为152.2MPa,比纯PLA降低了73.2%,薄膜的柔韧性得到提升。To solve the problems of easy leakage and poor mechanical properties of phase change materials,this paper prepared PEG/PLA phase change flms with poly(lactic acid)(PLA)as the substrate and poly(ethylene glycol)(PEG)as the phase change agent.The thermal and mechanical properties were tested,and the results showed that PLA as a supporting substrate effectively prevented the leakage of PEG liquid.the highest relative enthalpy efficiency of 103.87%was achieved at the PEG/PLA ratio of 180/100,and the latent heats of melting and solidification were 128.5J·g^(-1)and 120.2 J·g^(-1),respectively.with the increase of PEG ratio,the film Young's modulus gradually decreased with the increase of PEG ratio,and the Young's modulus was 152.2 MPa at the PEG/PLA ratio of 180/100,which was 73.2%lower than that of pure PLA,and the fexibility of the film was improved.

关 键 词：柔性相变薄膜 聚乳酸 热性能 力学性能 

分 类 号：TB34[一般工业技术—材料科学与工程]