热电池用高电位NiCl_(2)正极材料的制备及改性研究  

Preparation and modification of high potential NiCl_(2) cathode materials for thermal batteries

作　　者：唐立成 唐军 罗莉 王旭峰 潘旗 TANG Licheng;TANG Jun;LUO Li;WANG Xufeng;PAN Qi(State Key Laboratory of Advanced Chemical Power Sources,Guizhou Meiling Power Sources Co.,Ltd.,Zunyi Guizhou 563003,China)

机构地区：[1]贵州梅岭电源有限公司特种化学电源国家重点实验室,贵州遵义563003

出　　处：《电源技术》2024年第5期931-935,共5页Chinese Journal of Power Sources

摘　　要：采用两步法除水工艺制备了无水NiCl_(2),通过物理掺杂改性方式制备了NiCl_(2)-FeS_(2)复合正极材料,并对其理化特性和电化学性能进行了研究。研究结果表明:低温翻松脱水工艺叠加高温升华工艺可以批量制备出无氧化杂质、低吸水率和高结晶度的无水NiCl_(2);在NiCl_(2)中添加FeS_(2)可以提高热电池的峰值电压和前期大电流负载能力,并大幅延长工作时间;当FeS_(2)添加量为10%时,电池整体性能优异,脉冲比功率高达20 kW/kg,对高电压、高比功率热电池的研发具有重要价值。In this paper,anhydrous NiCl_(2)was successfully prepared by two-step dehydration process combining low-temperature loose dehydration and high-temperature sublimation.Then NiCl_(2)-FeS_(2) composite cathode material was prepared by physical mixing.Its physicochemical properties and electrochemical properties were studied.The anhydrous NiCl_(2) shows low water absorption,high crystallinity without any oxide impurities.FeS_(2) compositioncan effectively improve the peak voltage and high-current load capacity of thermal batteries,and greatly prolonging the working time.When the addition of 10%FeS_(2),the composite presents the excellent comprehensive electrical performance of the thermal battery.The pulse specific power reaches up to 20 kW/kg.These results are very helpful for research and development of high voltage and high specific power thermal battery.

关 键 词：热电池 高电位 氯化镍 复合正极 

分 类 号：TM91[电气工程—电力电子与电力传动]