HFW焊接接头的原位拉伸试验研究  

Research on the In-situ Tensile Test of the HFW Weld Joint

作　　者：聂向晖 李维星 张建生 王敏娜 李彩萍 薛峰[4] 王嘉玮 巨翔 NIE Xianghui;LI Weixing;ZHANG Jiansheng;WANG Minna;LI Caiping;XUE Feng;WANG Jiawei;JU Xiang(CNPC Tubular Goods Research Institute,Xi′an,Shaanxi 710077,China;PipeChina Nanshang(Shandong)LNG Co.Ltd.,Yantai,Shandong 264000,China;Xi′an Qingan Refrigeration Equipment Co.,Ltd.,Xi′an,Shaanxi 710075,China;Changqing Oilfield Branch of China National Petroleum Corporation,Xi′an,Shaanxi 710021,China)

机构地区：[1]中国石油集团工程材料研究院有限公司,陕西西安710077 [2]国家管网集团南山(山东)天然气有限公司,山东烟台264000 [3]西安庆安制冷设备股份有限公司,陕西西安710075 [4]中国石油天然气股份有限公司长庆油田分公司,陕西西安710021

出　　处：《石油管材与仪器》2024年第3期78-82,共5页Petroleum Tubular Goods & Instruments

摘　　要：为了研究HFW焊接接头在载荷作用下的微观变形特点,利用扫描电镜下的原位拉伸试验对其变形过程进行了观察。在拉伸过程中试样变形主要集中在热影响区,裂纹在热影响区形核,并垂直于拉伸方向扩展,直至试样断裂。HFW焊接接头的断裂为延性断裂,裂纹呈穿晶型。其变形及开裂过程包括:试样弹性伸长、晶内滑移开动、试样缩颈变形和试样开裂。在拉伸作用下,滑移变形不断积累是造成裂纹形成及试样断裂的主要原因。In order to study the microscopic deformation characteristics of HFW welded joints,In-situ tensile test under SEM was used to observe its deformation process.During the test,the deformation mainly occurred in the heat affected zone of the joint,crack arose and expanded perpendicular to the tensile direction,until the specimen fractures.The fracture of HFW joint is the ductile fracture,and the main crack is transgranular cracking.The deformation and cracking process includes elastic elongation of specimen,intragranular slip deformation,necking and cracking.Under tension,slip deformation accumulates continuously,which is the main cause of crack formation and specimen fracture.

关 键 词：原位拉伸 缩颈 滑移变形 裂纹 

分 类 号：TE832[石油与天然气工程—油气储运工程]