低光泽兼IRLEC的制备及其颜填料Al-Sr10最佳含量的模拟  

Preparation of Low Gloss IRLEC and Simulation of Optimal Content of Pigmented FillerAl-Sr1o

作　　者：王业健 张登 霍文辉 徐国跃[2] 张雪原 WANG Ye-jian;ZHANG Deng;HUO Wen-hui;XU Guo-yue;ZHANG Xue-yuan(Key Laboratory of Aeronautical Science and Technology for Structural Corrosion Protection and Control,China Special Vehicle Research Institute,Jingmen 448035;College of Materials Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 21l106;AVIC Xi'an Aircraft Industry Group Company Ltd,Xi'an 710089)

机构地区：[1]中国特种飞行器研究所结构腐蚀防护与控制航空科技重点实验室,荆门448035 [2]南京航空航天大学材料科学与技术学院,南京211106 [3]中航西安飞机工业集团股份有限公司,西安710089

出　　处：《环境技术》2024年第5期103-108,共6页Environmental Technology

摘　　要：为了模拟Al-Sr10基低光泽兼低发射率涂层的最佳颜填料含量,以一维晶体结构理论为指导,并结合红外涂层的微观形貌特征,总结了一种用于确定涂层填料最佳含量的分析方法。并采用模拟计算和实验验证的方式对该类方法的可行性进行了研究,同时以纯铝基涂层为对照组,探究了Al-Sr10基涂层的发射率及光泽度性能,结果表明:计算所得最佳Al-Sr10含量与模拟值一致;Al-Sr10基涂层相比于纯铝基涂层具有更好的红外低发射率兼低光泽性能。In order to simulate the optimal pigment content for Al-Srio-based low gloss and low emissivity coatings,a method for simulating the pigment content of infrared-compatible coatings has been developed based on the microstructural features of these coatings and the theory of onedimensional photonic structures.The feasibility of this type of method was also investigated by means of simulation and experimental validation,and the emissivity and gloss properties of Al-Srio-based coatings were also explored using pure aluminum-based coatings as a control group,and the results showed that the optimal Al-Srlo content obtained from the calculations was in agreement with the simulated values;Al-Srl0-based coatings have better IR low emissivity and low gloss properties compared to pure aluminum-based coatings.

关 键 词：Al-Sr10 低发射率 低光泽 一维光子结构 含量模拟 

分 类 号：TN213[电子电信—物理电子学]