AO-MBBR-MBR工艺在造纸废水深度处理中的中试应用  

Pilot Test of AO-MBBR-MBR Process in Advanced Treatment of Papermaking Wastewater

作　　者：黄仕良 李文龙 邱敬贤 叶明强 Huang Shiliang;Li Wenlong;Qiu Jingxian;Ye Mingqiang(Aerospace Kaitian Environmental Technology Co.,Ltd.,Changsha,Hunan 410100,China)

机构地区：[1]航天凯天环保科技股份有限公司,长沙410100

出　　处：《中华纸业》2024年第5期52-56,共5页China Pulp & Paper Industry

摘　　要：针对目前造纸行业废水生化处理工艺运行效果差、不稳定的问题,采用处理工艺为AO-MBBR-MBR的中试设备处理造纸废水,研究中试设备处理造纸废水过程中的污泥量变化、COD_(Cr)和TN去除效果。结果表明:M BBR填料为微生物提供良好的聚集场所,有利于形成体积较大的菌胶团,提高了好氧区污泥浓度。系统运行稳定后,COD_(Cr)及TN的去除率均在90%以上,出水CODCr和TN满足《地表水环境质量标准》(GB3838-2002)中的Ⅳ标准。In view of the poor and unstable operation effect of wastewater biochemical treatment process in papermaking industry,the pilot equipment of AO-MBBR-MBR process was used to treat papermaking wastewater,and the sludge volume change,COD_(Cr) and TN removal effect in the process of wastewater treatment by pilot equipment were studied.The results showed that MBBR fillings provided a good gathering place for microorganisms,which was conducive to the formation of larger bacterial colonies and increased the sludge concentration in the aerobic zone.After a stable operation,the removal rates of COD_(Cr) and TN were both above 90%,and the effluent COD_(Cr) and TN met the IV standard of the Surface Water Quality Standard(GB3838-2002).

关 键 词：中试设备 AO-MBBR-MBR 污泥量 COD_(Cr) TN 

分 类 号：X793[环境科学与工程—环境工程]