检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张伟[1] Zhang Wei(SINOPEC Qingdao Refining&Chemical Co.,Ltd.,Qingdao,Shandong 266500)
机构地区:[1]中国石化青岛炼油化工有限责任公司,山东省青岛市266500
出 处:《炼油技术与工程》2024年第5期29-32,共4页Petroleum Refinery Engineering
摘 要:某公司对S Zorb装置首个运行周期内出现的反应器接收器脱气线泄漏、再生器取热盘管泄漏等运行问题开展了技术攻关,提出了工艺优化调整、工程技术改造建议。2019年大检修时对反应器脱气线进行扩径,由DN100扩径为DN150,控制气提量小于670 m^(3)/h,对再生系统取热蒸汽和再生风流控阀等进行了工程技术改造。第二运行周期未出现脱气线减薄泄漏和再生器取热盘管泄漏问题。2023年6月大检修时对上次大检修改造部位进行检查以验证工程改造的有效性,经全面检查,确认脱气线内部未发现冲刷痕迹,再生器取热盘管打压合格,外观正常,证明改造措施有效,可以满足“四年一修”目标要求。A company has conducted technical research on operational issues such as reactor receiver degassing line leakage and regenerator heat coil leakage that occurred during the first operating cycle of the S Zorb unit,and has proposed suggestions for process optimization adjustment and engineering technology transformation.During the 2019 major overhaul,the degassing line of the reactor was expanded from DN100 to DN150,with a controlled gas lift rate of less than 670 m^(3)/h,and engineering and technical renovations were made to the heat steam and regeneration air flow control valve of the regeneration system.In the second operating cycle,there were no issues with thinning and leakage of the degassing line or leakage of the regeneration heating coil.In June 2023,during the major overhaul,an inspection was conducted on the parts of the last overhaul to verify the effectiveness of the engineering renovation.After a comprehensive inspection,no traces of erosion were found inside the degassing line,the regeneration heating coil was compressed and found to be qualified,and the appearance inspection was normal,proving that the renovation measures were effective and could meet the goal of“one repair every four years”.
关 键 词:S Zorb装置 反应器接收器 脱气线 再生器 取热盘管 泄漏 冲刷腐蚀 高频振荡
分 类 号:TE96[石油与天然气工程—石油机械设备]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.17.141.193