污水处理厂深度处理段集约化设计  

Intensive Design of Advanced Treatment Section of Wastewater Treatment Plant

作　　者：景兆华 贾恒松 王斌 雷克刚 石凤 JING Zhao-hua;JIA Heng-song;WANG Bin;LEI Ke-gang;SHI Feng(CSCEC AECOM Consultants Co.Ltd.,Lanzhou 730000,China)

机构地区：[1]中国市政工程西北设计研究院有限公司,甘肃兰州730000

出　　处：《中国给水排水》2024年第10期58-63,共6页China Water & Wastewater

摘　　要：浦江县污水处理厂(一厂)总处理规模为10×10^(4) m^(3)/d,由于厂区用地受限,深度处理段采用集约化设计方案。将中间提升泵房、高效沉淀池、碳源混合池、反硝化深床滤池、接触消毒池、废水调节池、反冲洗鼓风机房、反冲洗水泵房、厂区回用水泵房、出水监测站房、变配电室进行了合建,构筑物之间通过过水连渠及孔洞进行连接,节约用地,节能减碳,出水水质稳定达到浙江省《城镇污水处理厂主要水污染物排放标准》(DB 33/2169—2018)中现有城镇污水处理厂主要水污染物排放限值,可为地上式污水处理厂深度处理段的集约化设计提供借鉴。The total treatment capacity of Pujiang wastewater treatment plant(plant 1) is 10×10^(4) m^(3)/d.Due to the limited land use of the plant,the intensive design scheme is adopted for the advanced treatment.The intermediate lifting pump room,high efficiency sedimentation tank,carbon source mixing tank,denitrification deep bed filter,contact disinfection tank,wastewater regulation tank,backwashing blower room,backwashing water pump room,water reuse pump room,effluent monitoring station room,and transformer and distribution room are co-constructed,the structures are connected through water channels and holes,which can save land,save energy and reduce carbon,and the effluent quality stably meets the discharge limits of major pollutants from existing urban wastewater treatment plant as specified in the Discharge Standard of Major Water Pollutants for Municipal Wastewater Treatment Plant(DB 33/2169-2018) of Zhejiang Province.It can provide practical engineering reference for the intensive design of the advanced treatment section of the above-ground wastewater treatment plant.

关 键 词：深度处理 集约化设计 污水处理厂 

分 类 号：TU992[建筑科学—市政工程]