大型磨机筒体加工支撑工艺优化  

Optimization of support technology for large mill shell machining

作　　者：张雁 孙利强 张慧洁 ZHANG Yan;SUN Liqiang;ZHANG Huijie(Luoyang Mining Machinery Engineering Design Institute Co.,Ltd.,Luoyang 471039,Henan,China;State Key Laboratory of Intelligent Mining Heavy Equipment,Luoyang 471039,Henan,China;CITIC Heavy Industries Co.,Ltd.,Luoyang 471039,Henan,China)

机构地区：[1]洛阳矿山机械工程设计研究院有限责任公司,河南洛阳471039 [2]智能矿山重型装备全国重点实验室,河南洛阳471039 [3]中信重工机械股份有限公司,河南洛阳471039

出　　处：《矿山机械》2024年第6期58-60,共3页Mining & Processing Equipment

摘　　要：对大型磨机筒体加工支撑工装进行了介绍,分析了采用粗制螺栓连接状态下筒体加工的可靠性,并进行了加工工艺优化。筒体采用粗制螺栓连接后,支撑工装能够重复循环利用,降低了筒体支撑工装的制造成本。该优化方案可以为其他产品的加工提供经验借鉴。The support tooling for the large mill shell machining was introduced.Then,the reliability of the shell machining under the condition of rough bolts connection was analyzed,and the machining technology was optimized.After the shell was connected by rough bolts,the support tooling could be reused,which reduced the manufacturing cost of the shell support tooling.The optimization scheme could provide experience for the machining of other products.

关 键 词：磨机筒体 车削加工 铰制孔 

分 类 号：TD453[矿业工程—矿山机电]