载铁活性氧化铝催化臭氧氧化处理废水COD的工艺研究  

Treatment of COD in Wastewater by Catalytic Ozonation with Iron-carrying Activated Alumina

作　　者：罗桂林[1] 王婷 耿雅雯 Luo Guilin;Wang Ting;Geng Yawen(School of Science and Chemical Engineering,Ningxia University of Technology,Shizuishan 753000,China)

机构地区：[1]宁夏理工学院理学与化学工程学院,宁夏石嘴山753000

出　　处：《云南化工》2024年第6期53-55,共3页Yunnan Chemical Technology

基　　金：宁夏自然基金项目资助(项目名称:石化二级出水胶体大分子对臭氧催化氧化影响机理研究,基金号:2023AAC03370)。

摘　　要：为了提高臭氧催化氧化技术对工业废水中有机污染物的去除效率,采用浸渍法,将铁负载于活性氧化铝上。当硝酸铁浓度为0.8 mol/L、臭氧量为5 g/h时,载铁活性氧化铝催化臭氧氧化工业废水有机污染物的去除率最大,约为56%。相比单独使用吸附和臭氧催化氧化技术,它大大提高了废水有机污染物的去除效果。因此载铁活性氧化铝催化臭氧氧化可作为高浓度工业废水去除有机污染物的一种有效方法。In order to improve the removal efficiency of COD from industrial wastewater by ozonation catalytic oxidation technology,the impregnation method was used to load iron onto the activated alumina.When the concentration of ferric nitrate was 0.8 mol/L and the amount of ozone was 5g/h,the removal efficiency of COD from industrial wastewater was increased,the removal efficiency of COD from industrial wastewater by catalytic ozonation with iron-carrying activated alumina is the highest,with a maximum removal efficiency of about 56%.Compared with adsorption and ozone catalytic oxidation alone,it greatly improves the removal effect of organic pollutants in wastewater.So catalytic ozonation with iron-carrying activated alumina can be an effective method to remove COD from high concentration industrial wastewater.

关 键 词：工业废水 催化氧化 臭氧氧化 活性氧化铝 铁 COD 

分 类 号：X789[环境科学与工程—环境工程]